Re: [PATCH v2 14/14] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 09, 2024 at 04:50:27PM GMT, Jun Nie wrote:
> Request 4 mixers and 4 DSC for the case that both dual-DSI and DSC are
> enabled. We prefer to use 4 pipes for dual DSI case for it is power optimal
> for DSC.
> 
> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c         |  2 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h         |  6 ++---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c      | 29 ++++++++++++++++++------
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h |  3 ++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h   |  1 +
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h      |  2 +-
>  6 files changed, 30 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index d2aca0a9493d5..dbdfff1c7792a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -200,7 +200,7 @@ static int dpu_crtc_get_lm_crc(struct drm_crtc *crtc,
>  		struct dpu_crtc_state *crtc_state)
>  {
>  	struct dpu_crtc_mixer *m;
> -	u32 crcs[CRTC_DUAL_MIXERS];
> +	u32 crcs[CRTC_QUAD_MIXERS];
>  
>  	int rc = 0;
>  	int i;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> index ee7cf71f89fc7..f8276afd99192 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> @@ -211,7 +211,7 @@ struct dpu_crtc_state {
>  
>  	bool bw_control;
>  	bool bw_split_vote;
> -	struct drm_rect lm_bounds[CRTC_DUAL_MIXERS];
> +	struct drm_rect lm_bounds[CRTC_QUAD_MIXERS];
>  
>  	uint64_t input_fence_timeout_ns;
>  
> @@ -219,10 +219,10 @@ struct dpu_crtc_state {
>  
>  	/* HW Resources reserved for the crtc */
>  	u32 num_mixers;
> -	struct dpu_crtc_mixer mixers[CRTC_DUAL_MIXERS];
> +	struct dpu_crtc_mixer mixers[CRTC_QUAD_MIXERS];
>  
>  	u32 num_ctls;
> -	struct dpu_hw_ctl *hw_ctls[CRTC_DUAL_MIXERS];
> +	struct dpu_hw_ctl *hw_ctls[CRTC_QUAD_MIXERS];
>  
>  	u32 num_dscs;
>  	enum dpu_crtc_crc_source crc_source;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 68655c8817bf8..ed220ac691e8a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -54,7 +54,7 @@
>  #define MAX_PHYS_ENCODERS_PER_VIRTUAL \
>  	(MAX_H_TILES_PER_DISPLAY * NUM_PHYS_ENCODER_TYPES)
>  
> -#define MAX_CHANNELS_PER_ENC 2
> +#define MAX_CHANNELS_PER_ENC 4
>  
>  #define IDLE_SHORT_TIMEOUT	1
>  
> @@ -588,15 +588,19 @@ static struct msm_display_topology dpu_encoder_get_topology(
>  
>  	/* Datapath topology selection
>  	 *
> -	 * Dual display
> +	 * Dual display without DSC
>  	 * 2 LM, 2 INTF ( Split display using 2 interfaces)
>  	 *
> +	 * Dual display with DSC
> +	 * 4 LM, 2 INTF ( Split display using 2 interfaces)
> +	 *
>  	 * Single display
>  	 * 1 LM, 1 INTF
>  	 * 2 LM, 1 INTF (stream merge to support high resolution interfaces)
>  	 *
>  	 * Add dspps to the reservation requirements if ctm is requested
>  	 */
> +
>  	if (intf_count == 2)
>  		topology.num_lm = 2;
>  	else if (!dpu_kms->catalog->caps->has_3d_merge)
> @@ -615,10 +619,21 @@ static struct msm_display_topology dpu_encoder_get_topology(
>  		 * 2 DSC encoders, 2 layer mixers and 1 interface
>  		 * this is power optimal and can drive up to (including) 4k
>  		 * screens
> +		 * But for dual display case, we prefer 4 layer mixers. Because
> +		 * the resolution is always high in the case and 4 DSCs are more
> +		 * power optimal. While a single SSPP can only co-work with one
> +		 * mixer pair. So 4 mixers are needed in this case.

What is the relationship between SSPP working with a mixer pair and
high-res using 4 mixers? You have been writing about DSC, then you
suddently mention SSPP.

>  		 */
> -		topology.num_dsc = 2;
> -		topology.num_lm = 2;
> -		topology.num_intf = 1;
> +
> +		if (intf_count == 2) {
> +			topology.num_dsc = 4;
> +			topology.num_lm = 4;
> +			topology.num_intf = 2;
> +		} else {
> +			topology.num_dsc = 2;
> +			topology.num_lm = 2;
> +			topology.num_intf = 1;
> +		}
>  	}
>  
>  	return topology;
> @@ -2031,8 +2046,8 @@ static void dpu_encoder_helper_reset_mixers(struct dpu_encoder_phys *phys_enc)
>  	struct dpu_hw_mixer_cfg mixer;
>  	int i, num_lm;
>  	struct dpu_global_state *global_state;
> -	struct dpu_hw_blk *hw_lm[2];
> -	struct dpu_hw_mixer *hw_mixer[2];
> +	struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
> +	struct dpu_hw_mixer *hw_mixer[MAX_CHANNELS_PER_ENC];
>  	struct dpu_hw_ctl *ctl = phys_enc->hw_ctl;
>  
>  	memset(&mixer, 0, sizeof(mixer));
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e77ebe3a68da9..c877ee45535ac 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -324,7 +324,8 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
>  
>  	/* Use merge_3d unless DSC MERGE topology is used */
>  	if (phys_enc->split_role == ENC_ROLE_SOLO &&
> -	    dpu_cstate->num_mixers == CRTC_DUAL_MIXERS &&
> +	    (dpu_cstate->num_mixers == CRTC_DUAL_MIXERS ||
> +		dpu_cstate->num_mixers == CRTC_QUAD_MIXERS) &&
>  	    !dpu_encoder_use_dsc_merge(phys_enc->parent))
>  		return BLEND_3D_H_ROW_INT;
>  
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index bf86d643887dd..f79ecd409a830 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -25,6 +25,7 @@
>  #define MAX_IMG_HEIGHT 0x3fff
>  
>  #define CRTC_DUAL_MIXERS	2
> +#define CRTC_QUAD_MIXERS	4
>  
>  #define MAX_XIN_COUNT 16
>  
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index d8f5cffa60ea6..671e03406df74 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -32,9 +32,9 @@
>  #define DPU_MAX_PLANES			4
>  #endif
>  
> -#define PIPES_PER_PLANE			2
>  #define PIPES_PER_LM_PAIR		2
>  #define LM_PAIRS_PER_PLANE		2
> +#define PIPES_PER_PLANE			(PIPES_PER_LM_PAIR * LM_PAIRS_PER_PLANE)
>  #ifndef DPU_MAX_DE_CURVES
>  #define DPU_MAX_DE_CURVES		3
>  #endif
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux