Re: [PATCH 2/2] drm/msm/dpu: configure DSC per number in use

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 10 Oct 2024 at 04:47, Jun Nie <jun.nie@xxxxxxxxxx> wrote:
>
> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> 于2024年10月10日周四 06:10写道:
> >
> > On Wed, 9 Oct 2024 at 09:39, Jun Nie <jun.nie@xxxxxxxxxx> wrote:
> > >
> > > Only 2 DSC engines are allowed, or no DSC is involved currently.
> >
> > Can't parse this phrase.
>
> How about this:
> If DSC is enabled, the only case is with 2 DSC engines so far.

Just:

Currently if DSC support is requested, the driver only supports using
2 DSC blocks.

>
>
> >
> > > We need 4 DSC in quad-pipe topology in future. So let's only configure
> > > DSC engines in use, instread of maximum number of DSC engines.
> >
> > Nit: instead
>
> Yep.
> >
> > >
> > > Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 13 ++++++++-----
> > >  1 file changed, 8 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > index 39700b13e92f3..e8400b494687c 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > @@ -1871,10 +1871,13 @@ static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_ctl *ctl,
> > >                 ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> > >  }
> > >
> > > -static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
> > > -                                struct drm_dsc_config *dsc)
> > > +static void dpu_encoder_prep_dsc(struct drm_encoder *drm_enc)
> > >  {
> > >         /* coding only for 2LM, 2enc, 1 dsc config */
> > > +       struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> > > +       struct dpu_crtc_state *cstate = to_dpu_crtc_state(drm_enc->crtc->state);
> > > +       struct drm_dsc_config *dsc = dpu_enc->dsc;
> >
> > Why? This doesn't seem to be related to num_dscs introduction.
>
> You mean the comments above these 3 lines? Yeah, it should be removed.

No, I mean that this whole chunk isn't related to the num_dsc support.
There is no need to change function arguments.

> >
> > > +       int num_dsc = cstate->num_dscs;
> > >         struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
> > >         struct dpu_hw_ctl *ctl = enc_master->hw_ctl;
> > >         struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> >
> > [...]
> >
> > > @@ -1953,7 +1956,7 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
> > >         }
> > >
> > >         if (dpu_enc->dsc)
> > > -               dpu_encoder_prep_dsc(dpu_enc, dpu_enc->dsc);
> > > +               dpu_encoder_prep_dsc(drm_enc);
> > >  }
> > >
> > >  bool dpu_encoder_is_valid_for_commit(struct drm_encoder *drm_enc)
> > >
> > > --
> > > 2.34.1
> > >
> >
> >
> > --
> > With best wishes
> > Dmitry



-- 
With best wishes
Dmitry





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux