Re: [PATCH 4/5] ARM: dts: qcom: Remove size elements from pmic reg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 18 May 22:00 PDT 2016, Andy Gross wrote:

> The #size-cells for the pmics are 0, but we specify a size in the
> reg property so that MPP and GPIO modules can figure out how many
> pins there are. Now that we've done that by counting irqs, we can
> remove the size elements in the reg properties and be DT
> compliant.
> 
> Signed-off-by: Andy Gross <andy.gross@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> ---
>  arch/arm/boot/dts/qcom-pma8084.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
> index 4e9bd3f..ea7fce3 100644
> --- a/arch/arm/boot/dts/qcom-pma8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
> @@ -12,15 +12,15 @@
>  
>  		rtc@6000 {
>  			compatible = "qcom,pm8941-rtc";
> -			reg = <0x6000 0x100>,
> -			      <0x6100 0x100>;
> +			reg = <0x6000>,
> +			      <0x6100>;
>  			reg-names = "rtc", "alarm";
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
>  
>  		pma8084_gpios: gpios@c000 {
>  			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
> -			reg = <0xc000 0x1600>;
> +			reg = <0xc000>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> @@ -49,7 +49,7 @@
>  
>  		pma8084_mpps: mpps@a000 {
>  			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
> -			reg = <0xa000 0x800>;
> +			reg = <0xa000>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
> @@ -64,7 +64,7 @@
>  
>  		pma8084_temp: temp-alarm@2400 {
>  			compatible = "qcom,spmi-temp-alarm";
> -			reg = <0x2400 0x100>;
> +			reg = <0x2400>;
>  			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
>  			#thermal-sensor-cells = <0>;
>  			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
> @@ -73,7 +73,7 @@
>  
>  		pma8084_vadc: vadc@3100 {
>  			compatible = "qcom,spmi-vadc";
> -			reg = <0x3100 0x100>;
> +			reg = <0x3100>;
>  			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux