Re: [PATCH v4 3/3] arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Aleksandrs,

[Again in plain text]

On Thu, 3 Oct 2024 at 23:13, Aleksandrs Vinarskis
<alex.vinarskis@xxxxxxxxx> wrote:
>
> Initial support for Dell XPS 9345 13" 2024 (Codenamed 'Tributo') based
> on X1E80100.
>
> Working:
> * Touchpad
> * Keyboard (only post suspend&resume, i2c-hid patch required [1])
> * Touchscreen
> * eDP (low-res IPS, OLED) with brightness control
> * NVME
> * USB Type-C ports in USB2/USB3 (one orientation)
> * WiFi
> * GPU/aDSP/cDSP firmware loading (requires binaries from Windows)
> * Lid switch
> * Sleep/suspend, nothing visibly broken on resume
>
> Not working:
> * Speakers (WIP, pin guessing, x4 WSA8845)
> * Microphones (WIP, pin guessing, dual array)
> * Fingerprint Reader (WIP, USB MP with ptn3222)
> * USB as DP/USB3 (WIP, PS8830 based)
> * Camera (Likely OV01A10)
> * EC over i2c
>
> Should be working, but cannot be tested due to lack of hw:
> * higher res IPS panel
>
> [1] https://lore.kernel.org/all/20240925100303.9112-1-alex.vinarskis@xxxxxxxxx/
>
> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../dts/qcom/x1e80100-dell-xps13-9345.dts     | 863 ++++++++++++++++++
>  2 files changed, 864 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts

Tested-by: Stefan Schmidt <stefan.schmidt@xxxxxxxxxx>

regards
Stefan Schmidt




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux