CBT U-Boot ver: 3.2.08 ([IPQ5018].[SPF11.3].[CSU2])
DRAM: smem ram ptable found: ver: 1 len: 4
512 MiB
NAND: QPIC controller support serial NAND
ID = 22c822c8
Vendor = c8
Device = 22
Serial Nand Device Found With ID : 0xc8 0x22
Serial NAND device Manufacturer:GD5F2GQ5REYIH
Device Size:256 MiB, Page size:2048, Spare Size:64, ECC:4-bit
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC: sdhci: Node Not found, skipping initialization
PCI Link Intialized
PCI1 is not defined in the device tree
In: serial@78AF000
Out: serial@78AF000
Err: serial@78AF000
machid: 8040001
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Updating boot_count ... done
Saving Environment to NAND...
Erasing NAND...
Erasing at 0x5c0000 -- 25% complete.
Erasing at 0x5e0000 -- 50% complete.
Erasing at 0x600000 -- 75% complete.
Erasing at 0x620000 -- 100% complete.
Writing to NAND... OK
Hit any key to stop autoboot: 3 2 1 0
starting USB...
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 2 USB Device(s) found
reading boot-image.itb
16048071 bytes read in 8855 ms (1.7 MiB/s)
## Loading kernel from FIT Image at 44000000 ...
Using 'standard' configuration
Trying 'kernel' kernel subimage
Description: Kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x440000a8
Data Size: 8249289 Bytes = 7.9 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41208000
Entry Point: 0x41208000
Verifying Hash Integrity ... OK
## Loading ramdisk from FIT Image at 44000000 ...
Using 'standard' configuration
Trying 'initrd' ramdisk subimage
Description: Initramfs image
Type: RAMDisk Image
Compression: Unknown Compression
Data Start: 0x447ec43c
Data Size: 7738968 Bytes = 7.4 MiB
Architecture: AArch64
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Verifying Hash Integrity ... OK
## Loading fdt from FIT Image at 44000000 ...
Using 'standard' configuration
Trying 'fdt' fdt subimage
Description: DTB
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x447de10c
Data Size: 58042 Bytes = 56.7 KiB
Architecture: AArch64
Verifying Hash Integrity ... OK
Booting using the fdt blob at 0x447de10c
Loading Kernel Image ... OK
Loading Ramdisk to 4a0c0000, end 4a821658 ... OK
Loading Device Tree to 4a0ae000, end 4a0bf2b9 ... OK
fdt_fixup_qpic: QPIC: unable to find node '/soc/qpic-nand@79b0000'
Could not find PCI in device tree
Using machid 0x8040001 from environment
Starting kernel ...
undefined instruction
pc : [<41208004>] lr : [<4a921f8f>]
reloc pc : [<41208004>] lr : [<4a921f8f>]
sp : 4a822838 ip : 00000001 fp : 00000000
r10: 4a83b914 r9 : 4a822ea0 r8 : 00000000
r7 : 00000000 r6 : 41208000 r5 : 4a97d848 r4 : 00000000
r3 : 644d5241 r2 : 4a0ae000 r1 : 08040001 r0 : 00000000
Flags: nzCV IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
