Re: [PATCH v5 0/2] Basic support for TI TDP158

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/10/2024 16:42, Dmitry Baryshkov wrote:

> On Mon, 7 Oct 2024 at 16:33, Marc Gonzalez <mgonzalez@xxxxxxxxxx> wrote:
>>
>> On 03/09/2024 14:40, Robert Foss wrote:
>>
>>> On Mon, 12 Aug 2024 16:51:00 +0200, Marc Gonzalez wrote:
>>>
>>>> TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver.
>>>>
>>>> Like the TFP410, the TDP158 can be set up in 2 different ways:
>>>> 1) hard-coding its configuration settings using pin-strapping resistors
>>>> 2) placing it on an I2C bus, and defer set-up until run-time
>>>>
>>>> The mode is selected by pin 8 = I2C_EN
>>>> I2C_EN = 1 ==> I2C Control Mode
>>>> I2C_EN = 0 ==> Pin Strap Mode
>>>>
>>>> [...]
>>>
>>> Applied, thanks!
>>>
>>> [1/2] dt-bindings: display: bridge: add TI TDP158
>>>       https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/887665792b99
>>> [2/2] drm/bridge: add support for TI TDP158
>>>       https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/a15710027afb
>>
>> Hello Robert,
>>
>> I expected this series to be included in v6.12-rc1, since you applied it
>> before the v6.12 merge window opened. Did I misunderstand the process?
> 
> drm-misc-next stops propagating new changes to drm-next one or two
> weeks before the release.

Oh right, the "stop at rc6" rule of thumb that Krzysztof mentioned.

Regards





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux