Document the various memory buses that can be monitored and scaled by the memory latency governor hosted by the QCOM SCMI Generic Extension Protocol v1.0. Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx> --- v3: * Restructure the bindings to mimic IMX [Christian] .../bindings/firmware/arm,scmi.yaml | 1 + .../bindings/firmware/qcom,scmi-memlat.yaml | 246 ++++++++++++++++++ .../dt-bindings/firmware/qcom,scmi-memlat.h | 22 ++ 3 files changed, 269 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml create mode 100644 include/dt-bindings/firmware/qcom,scmi-memlat.h diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 54d7d11bfed4..1d405f429168 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -24,6 +24,7 @@ description: | anyOf: - $ref: /schemas/firmware/nxp,imx95-scmi.yaml + - $ref: /schemas/firmware/qcom,scmi-memlat.yaml properties: $nodename: diff --git a/Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml b/Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml new file mode 100644 index 000000000000..0e8ea6dacd6a --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qcom,scmi-memlat.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/qcom,scmi-memlat.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SCMI Memory Bus nodes + +maintainers: + - Sibi Sankar <quic_sibis@xxxxxxxxxxx> + +description: + This binding describes the various memory buses that can be monitored and scaled + by memory latency governor running on the CPU Control Processor (SCMI controller). + +properties: + protocol@80: + $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node' + unevaluatedProperties: false + + properties: + reg: + const: 0x80 + + patternProperties: + '^memory-[0-9]$': + type: object + unevaluatedProperties: false + description: + The list of all memory buses that can be monitored and scaled by the + memory latency governor running on the SCMI controller. + + properties: + qcom,memory-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: | + Memory Bus Identifier + 0 = QCOM_MEM_TYPE_DDR + 1 = QCOM_MEM_TYPE_LLCC + 2 = QCOM_MEM_TYPE_DDR_QOS + + freq-table-hz: + items: + items: + - description: Minimum frequency of the memory bus in Hz + - description: Maximum frequency of the memory bus in Hz + + patternProperties: + '^monitor-[0-9]$': + type: object + unevaluatedProperties: false + description: + The list of all monitors detecting the memory latency bound workloads using + various counters. + + properties: + qcom,compute-type: + description: + Monitors of type compute perform bus dvfs based on a rudimentary CPU + frequency to memory frequency map. + type: boolean + + qcom,ipm-ceil: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Monitors having this property perform bus dvfs based on the same + rudimentary table but the scaling is performed only if the calculated + IPM (Instruction Per Misses) exceeds the given ceiling. + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + operating-points-v2: true + opp-table: + type: object + + required: + - cpus + - operating-points-v2 + + oneOf: + - required: [ 'qcom,compute-type' ] + - required: [ 'qcom,ipm-ceil' ] + + required: + - qcom,memory-type + - freq-table-hz + +additionalProperties: true + +examples: + - | + #include <dt-bindings/firmware/qcom,scmi-memlat.h> + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + protocol@80 { + reg = <0x80>; + + memory-0 { + qcom,memory-type = <QCOM_MEM_TYPE_DDR>; + freq-table-hz = /bits/ 64 <200000000 4224000000>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor0_opp_table>; + + memory0_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 547000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 768000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 1555000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 2092000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 3187000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + + monitor-1 { + qcom,compute-type; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor1_opp_table>; + + memory0_monitor1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 200000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 768000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 1555000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + }; + + memory-1 { + qcom,memory-type = <QCOM_MEM_TYPE_LLCC>; + freq-table-hz = /bits/ 64 <300000000 1067000000>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory1_monitor0_opp_table>; + + memory1_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 300000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 466000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 600000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 806000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 933000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 1066000000>; + }; + }; + }; + }; + + memory-2 { + qcom,memory-type = <QCOM_MEM_TYPE_DDR_QOS>; + freq-table-hz = /bits/ 64 <QCOM_DDR_LEVEL_AUTO QCOM_DDR_LEVEL_PERF>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory2_monitor0_opp_table>; + + memory2_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000>; + opp-level = <QCOM_DDR_LEVEL_AUTO>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000>; + opp-level = <QCOM_DDR_LEVEL_PERF>; + }; + }; + }; + }; + }; + }; + }; diff --git a/include/dt-bindings/firmware/qcom,scmi-memlat.h b/include/dt-bindings/firmware/qcom,scmi-memlat.h new file mode 100644 index 000000000000..7ae8d8d5623b --- /dev/null +++ b/include/dt-bindings/firmware/qcom,scmi-memlat.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +#ifndef __DT_BINDINGS_QCOM_SCMI_VENDOR_H +#define __DT_BINDINGS_QCOM_SCMI_VENDOR + +/* Memory IDs */ +#define QCOM_MEM_TYPE_DDR 0x0 +#define QCOM_MEM_TYPE_LLCC 0x1 +#define QCOM_MEM_TYPE_DDR_QOS 0x2 + +/* + * QCOM_MEM_TYPE_DDR_QOS supports the following states. + * + * %QCOM_DDR_LEVEL_AUTO: DDR operates with LPM enabled + * %QCOM_DDR_LEVEL_PERF: DDR operates with LPM disabled + */ +#define QCOM_DDR_LEVEL_AUTO 0x0 +#define QCOM_DDR_LEVEL_PERF 0x1 + +#endif /* __DT_BINDINGS_QCOM_SCMI_VENDOR_H */ -- 2.34.1
