Re: [PATCH v2 1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 04, 2024 at 04:57:37PM GMT, Abel Vesa wrote:
> Document bindings for the Parade PS8830 Type-C retimer. This retimer is
> currently found on all boards featuring Qualcomm Snapdragon X Elite SoCs
> and it is needed to provide altmode muxing between DP and USB, but also
> connector orientation handling between.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/usb/parade,ps8830.yaml     | 129 +++++++++++++++++++++
>  1 file changed, 129 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..f6721d6eee26c6d4590a12c19791b3d47a8145f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/parade,ps8830.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Parade PS8830 USB and DisplayPort Retimer
> +
> +maintainers:
> +  - Abel Vesa <abel.vesa@xxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - parade,ps8830
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XO Clock
> +
> +  clock-names:
> +    items:
> +      - const: xo
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: power supply (1.07V)
> +
> +  vdd33-supply:
> +    description: power supply (3.3V)
> +
> +  vdd33-cap-supply:
> +    description: power supply (3.3V)
> +
> +  vddar-supply:
> +    description: power supply (1.07V)
> +
> +  vddat-supply:
> +    description: power supply (1.07V)

Any additional details?

> +
> +  vddio-supply:
> +    description: power supply (1.2V or 1.8V)
> +
> +  orientation-switch: true
> +  retimer-switch: true
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Super Speed (SS) Output endpoint to the Type-C connector
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: Super Speed (SS) Input endpoint from the Super-Speed PHY

or from another SS signal source, which can be a mux, a switch or
anything else. I'd say, just 'Input Super Speed (SS)'

> +        unevaluatedProperties: false
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
> +          handling altmode muxing and orientation switching.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +allOf:
> +  - $ref: usb-switch.yaml#
> +
> +additionalProperties: false
> +

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux