[PATCH v3] arm64: dts: qcom: x1e80100-t14s: add another trackpad support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

Trackpad HID device on T14s could be found on two possible slave addresses
(hid@15 and hid@2c) on i2c0 instance.
With the current state of DT boot, there is no way to patch the device
tree at runtime during boot. This, however results in non-functional
trackpad on Product Models 21N2ZC5PUS which have trackpad on hid@2c
slave address.

This patch adds hid@2c device along with hid@15 to get it working on
both the variants. This should work as i2c-hid driver will stop
probing the device if there is nothing on the slave address, we can
actually keep both devices enabled in DT, and i2c-hid driver will
only probe the existing one.

The only problem is that we cannot setup pinctrl in both device nodes,
as two devices with the same pinctrl will cause pin conflict that makes
the second device fail to probe.  Let's move the pinctrl state up to
parent node along with the parent pinctrl to solve this problem.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---

Changes since v2:
- updated commit log
- added missing parent pinctrl

 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts  | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 08ec2419f95f..5aa295404800 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -551,6 +551,9 @@ zap-shader {
 &i2c0 {
 	clock-frequency = <400000>;
 
+	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	/* ELAN06E2 or ELAN06E3 */
@@ -561,13 +564,19 @@ touchpad@15 {
 		hid-descr-addr = <0x1>;
 		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
 
-		pinctrl-0 = <&tpad_default>;
-		pinctrl-names = "default";
-
 		wakeup-source;
 	};
 
-	/* TODO: second-sourced SYNA8022 or SYNA8024 touchpad @ 0x2c */
+	/* SYNA8022 or SYNA8024 */
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
 
 	/* ELAN06F1 or SYNA06F2 */
 	keyboard@3a {
-- 
2.39.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux