On 6/5/2016 12:57 PM, Andy Gross wrote:
On Thu, May 26, 2016 at 01:37:56PM -0600, Austin Christ wrote:
<snip>
@@ -1354,14 +1359,13 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
static int qup_i2c_probe(struct platform_device *pdev)
{
static const int blk_sizes[] = {4, 16, 32};
- struct device_node *node = pdev->dev.of_node;
struct qup_i2c_dev *qup;
unsigned long one_bit_t;
struct resource *res;
u32 io_mode, hw_ver, size;
int ret, fs_div, hs_div;
- int src_clk_freq;
- u32 clk_freq = 100000;
+ u32 src_clk_freq = 0;
+ u32 clk_freq = 0;
int blocks;
qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
@@ -1372,7 +1376,12 @@ static int qup_i2c_probe(struct platform_device *pdev)
init_completion(&qup->xfer);
platform_set_drvdata(pdev, qup);
- of_property_read_u32(node, "clock-frequency", &clk_freq);
+ ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
Why do we need a warning if the clock-frequency is not specified? It is
optional in the DT documentation, is it not in the ACPI?
I agree a warning is too strong here. The information may still be
useful about the driver configuration, so I will change it to a
dev_notify() in v4.
+ if (ret) {
+ dev_warn(qup->dev, "using default clock-frequency %d",
+ DEFAULT_CLK_FREQ);
+ clk_freq = DEFAULT_CLK_FREQ;
You could just assign the DEFAULT_CLK_FREQ in the variable declaration instead
of 0. read_property does not modify the variable unless it finds it or does the
ACPI version modify if not found?
You are correct about this function only modifying when it finds a
value. This will be corrected in v4.
+ }
if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
qup->adap.algo = &qup_i2c_algo;
@@ -1454,20 +1463,31 @@ nodma:
return qup->irq;
}
<snip>
Regards,
Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks,
Austin
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
