Add device tree source for Linksys EA9350 V3 which is a WiFi router based on the IPQ5018 SoC. As of now , only the UART,USB,USB LED,buttons is working.The front PWM LED require the IPQ PWM driver.Therefore the PWM LED isn't configed in the tree. Also The original firmware from Linksys can only boot ARM32 kernels. As of now There seems to be no way to boot ARM64 kernels on those device. However, it is possible to use this device tree by compiling an ARM32 kernel instead. Signed-off-by: Karl Chan <exxxxkc@xxxxxxxxxxxxxxx> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes in v3: - Add 2 commit that I forgot to send in v1/2. - Link to v2: https://lore.kernel.org/linux-arm-msm/20241002132302.31608-1-exxxxkc@xxxxxxxxxxxxxxx/T/#t Changes in v2: - reorder the properties in the tree to follow the usual order pointed out by Krzysztof Kozlowski - Add the missing word to the cover letter - Link to v1: https://lore.kernel.org/linux-arm-msm/20241002120804.25068-1-exxxxkc@xxxxxxxxxxxxxxx/T/#t --- Karl Chan (5): dt-bindings: arm: qcom: add Linksys EA9350 V3 arm64: dts: qcom: add Linksys EA9350 V3 clk: qcom: ipq5018: allow it to be bulid on arm32 pinctrl: qcom: ipq5018: allow it to be bulid on arm32 arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64 .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm/boot/dts/qcom/Makefile | 1 + .../dts/qcom/qcom-ipq5018-linksys-jamaica.dts | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/ipq5018-linksys-jamaica.dts | 107 ++++++++++++++++++ drivers/clk/qcom/Kconfig | 2 +- drivers/pinctrl/qcom/Kconfig.msm | 2 +- 7 files changed, 114 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts -- 2.46.1
