[Patch v6 00/10] Qualcomm SCM Rework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The following set of patches does a bit of rework on the existing
Qualcomm SCM firmware.  The first couple of patches deals with turning
the current SCM into a platform driver.  The next couple are cleanups
that make adding the 64 support a little easier.  I added in a patch to
convert the scm-32 to use DMA streaming APIs.

I took Kumar's 64 bit support patch and modified it to use the arm_smccc
calls.  This simplified things quite a bit.

Lastly, there are a few DT patches to add the firmware node for a couple of the
supported platforms.

Changes from v5:
  * Added SCM DT nodes for APQ8064 and MSM8974
  * Make core clk optional in probe
  * Update commit messages to describe some of the changes in more detail
  * Put back some of the SCM64 helper functions
  * Fix other miscellaneous review comments

Changes from v4:
  * Fix Documentation error
  * Fix misc review comments

Changes from v3:
  * Added compatibles for the specific platforms requiring one clock.
  * All other platforms will use the generic binding that requires 3 clocks.

Changes from v2:
  * Added use of streaming DMA APIs for scm-32.
  * Changed DT binding to simplify compats.
  * Removed Kconfig.platform change that selected QCOM_SCM for ARM64
  * Fixed misc comments
  * Changed init function to populate the device differently.
  * Fixed missing of_node_put

Changes from v1:
  * Changed binding to reflect proper firmware node usage
  * Added arch_initcall to populate the firmware device, if present
  * Fixed various review comments
  * Removed extraneous includes from SCM 64 file.

Andy Gross (9):
  dt/bindings: firmware: Add Qualcomm SCM binding
  firmware: qcom: scm: Convert SCM to platform driver
  firmware: qcom: scm: Use atomic SCM for cold boot
  firmware: qcom: scm: Generalize shared error map
  firmware: qcom: scm: Convert to streaming DMA APIS
  dts: qcom: apq8084: Add SCM firmware node
  arm64: dts: msm8916: Add SCM firmware node
  dts: qcom: msm8974: Add SCM firmware node
  dts: qcom: apq8064: Add SCM firmware node

Kumar Gala (1):
  firmware: qcom: scm: Add support for ARM64 SoCs

 .../devicetree/bindings/firmware/qcom,scm.txt      |  28 +++
 arch/arm/boot/dts/qcom-apq8064.dtsi                |   6 +
 arch/arm/boot/dts/qcom-apq8084.dtsi                |   8 +
 arch/arm/boot/dts/qcom-msm8974.dtsi                |   8 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |   8 +
 drivers/firmware/qcom_scm-32.c                     | 225 +++++++++------------
 drivers/firmware/qcom_scm-64.c                     | 202 +++++++++++++++++-
 drivers/firmware/qcom_scm.c                        | 180 ++++++++++++++++-
 drivers/firmware/qcom_scm.h                        |  31 ++-
 9 files changed, 543 insertions(+), 153 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux