---
.../bindings/pinctrl/qcom,qcs615-tlmm.yaml | 124 +++++++++++++++++++++
1 file changed, 124 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
new file mode 100644
index 000000000000..1ce4b5df584a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs615-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCS615 TLMM block
+
+maintainers:
+ - Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm QCS615 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,qcs615-tlmm
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: east
+ - const: west
+ - const: south
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 62
+
+ gpio-line-names:
+ maxItems: 123
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-qcs615-tlmm-state"
+ - type: object
+ patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-qcs615-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-qcs615-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-2])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
+ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+ atest_usb, cam_mclk, cci_async, cci_i2c, cci_timer, copy_gp,
+ copy_phase, cri_trng, dbg_out_clk, ddr_bist, ddr_pxi, dp_hot,
+ edp_hot, edp_lcd, emac_gcc, emac_phy_intr, forced_usb, gcc_gp,
+ gp_pdm, gps_tx, hs0_mi2s, hs1_mi2s, jitter_bist, ldo_en,
+ ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0_out,
+ mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync4_out,
+ mdp_vsync5_out, mi2s_1, mss_lte, nav_pps_in, nav_pps_out,
+ pa_indicator_or, pcie_clk_req, pcie_ep_rst, phase_flag, pll_bist,
+ pll_bypassnl, pll_reset_n, prng_rosc, qdss_cti, qdss_gpio,
+ qlink_enable, qlink_request, qspi, qup0, qup1, rgmii,
+ sd_write_protect, sp_cmu, ter_mi2s, tgu_ch, uim1, uim2, usb0_hs,
+ usb1_hs, usb_phy_ps, vfr_1, vsense_trigger_mirnat, wlan, wsa_clk,
+ wsa_data ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3000000 {
+ compatible = "qcom,qcs615-tlmm";
+ reg = <0x03100000 0x300000>,
+ <0x03500000 0x300000>,
+ <0x03c00000 0x300000>;
+ reg-names = "east", "west", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ qup3-uart2-state {
+ pins ="gpio16", "gpio17";
+ function = "qup0";
+ };
+ };
+...
