Re: [PATCH 7/8] arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/09/2024 14:12, Sricharan R wrote:
> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> 
> Add initial device tree support for the Qualcomm IPQ5424 SoC and
> rdp466 board.
> 
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts |  63 +++++
>  arch/arm64/boot/dts/qcom/ipq5424.dtsi       | 294 ++++++++++++++++++++
>  3 files changed, 358 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5424.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 197ab325c0b9..46c4eb758799 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5424-rdp466.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
> new file mode 100644
> index 000000000000..c8597a9ba175
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * IPQ5018 MP03.1-C2 board device tree source
> + *
> + * Copyright (c) 2023 The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5424.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5424 RDP466";
> +	compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
> +
> +	aliases {
> +		serial0 = &uart1;
> +	};
> +
> +	chosen	{
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&tlmm {
> +	sdc_default_state: sdc-default-state {
> +		clk-pins {
> +			pins = "gpio5";
> +			function = "sdc_clk";
> +			drive-strength = <8>;
> +			bias-disable;
> +		};
> +
> +		cmd-pins {
> +			pins = "gpio4";
> +			function = "sdc_cmd";
> +			drive-strength = <8>;
> +			bias-pull-up;
> +		};
> +
> +		data-pins {
> +			pins = "gpio0", "gpio1", "gpio2", "gpio3";
> +			function = "sdc_data";
> +			drive-strength = <8>;
> +			bias-pull-up;
> +		};
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-0 = <&uart1_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&sleep_clk {
> +	clock-frequency = <32000>;
> +};
> +
> +&xo_board {
> +	clock-frequency = <24000000>;
> +};
> +
> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> new file mode 100644
> index 000000000000..b6c08fac9482
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
> @@ -0,0 +1,294 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * IPQ5424 device tree source
> + *
> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
> +#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	interrupt-parent = <&intc>;
> +
> +	clocks {
> +		xo_board: xo-board-clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus: cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {

Lowercase labels please.

I am in process of fixing it everywhere.

> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +				cache-unified;
> +				next-level-cache = <&L3_0>;
> +				L3_0: l3-cache {
> +					compatible = "cache";
> +					cache-level = <3>;
> +					cache-unified;
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x100>;
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +				cache-unified;
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x200>;
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +				cache-unified;
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x300>;
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +				cache-unified;
> +				next-level-cache = <&L3_0>;
> +			};
> +		};
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0x0 0x80000000 0x0 0x0>;
> +	};
> +
> +	pmu {

pmu-a55

> +		compatible = "arm,cortex-a55-pmu";
> +		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	pmu-v7 {

pmu-a7 but... where is the A7 CPU?

> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;

Same interrupts? Huh?

> +	};
> +
> +	dsu-pmu {

pmu-dsu?

> +		compatible = "arm,dsu-pmu";
> +		interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
> +		cpus = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>;
> +		status = "okay";

Drop

> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		tz@8a600000 {
> +			reg = <0x0 0x8a600000 0x0 0x200000>;
> +			no-map;
> +		};
> +	};
> +
> +	soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +
> +		tlmm: pinctrl@1000000 {
> +			compatible = "qcom,ipq5424-tlmm";
> +			reg = <0 0x01000000 0 0x300000>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 50>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			uart1_pins: uart1-state {
> +				pins = "gpio43", "gpio44";
> +				function = "uart1";
> +				drive-strength = <8>;
> +				bias-pull-up;
> +			};
> +		};
> +
> +		gcc: clock-controller@1800000 {
> +			compatible = "qcom,ipq5424-gcc";
> +			reg = <0 0x01800000 0 0x40000>;
> +			clocks = <&xo_board>,
> +				 <&sleep_clk>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#interconnect-cells = <1>;
> +		};
> +
> +		qupv3: geniqup@1ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0 0x01ac0000 0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>,
> +				 <&gcc GCC_QUPV3_AHB_SLV_CLK>;
> +			clock-names = "m-ahb", "s-ahb";
> +			ranges;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +
> +			status = "okay";

Please do not upstream your downstream code...

> +
> +			uart1: serial@1a84000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0 0x01a84000 0 0x4000>;
> +				clocks = <&gcc GCC_QUPV3_UART1_CLK>;
> +				clock-names = "se";
> +				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
> +				status = "okay";

Work on upstream instead.

> +			};
> +		};
> +


Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux