Re: [PATCH V3 2/2] interconnect: qcom: add QCS8300 interconnect provider driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 18, 2024 at 03:10:34PM GMT, Raviteja Laggyshetty wrote:
> 
> 
> On 9/11/2024 4:18 PM, Dmitry Baryshkov wrote:
> > On Tue, Sep 10, 2024 at 10:10:13AM GMT, Raviteja Laggyshetty wrote:
> >> Add driver for the Qualcomm interconnect buses found in QCS8300
> >> based platforms. The topology consists of several NoCs that are
> >> controlled by a remote processor that collects the aggregated
> >> bandwidth for each master-slave pairs.
> >>
> >> Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
> >> ---
> >>  drivers/interconnect/qcom/Kconfig   |   11 +
> >>  drivers/interconnect/qcom/Makefile  |    2 +
> >>  drivers/interconnect/qcom/qcs8300.c | 2088 +++++++++++++++++++++++++++
> >>  drivers/interconnect/qcom/qcs8300.h |  177 +++
> >>  4 files changed, 2278 insertions(+)
> >>  create mode 100644 drivers/interconnect/qcom/qcs8300.c
> >>  create mode 100644 drivers/interconnect/qcom/qcs8300.h
> > 
> > The driver looks pretty close to sa8775p one. Would it make sense to
> > have a single driver instead? Or would it complicate things
> > significantly?
> > 
> 
> Yes, the target is close to sa8775p. but there are differences in the topology and same driver cannot be used for both targets.

Ack

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux