Re: [PATCH 07/13] dt-bindings: media: camss: Add qcom,sm8550-camss binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/09/2024 06:06, Vladimir Zapolskiy wrote:
On 9/13/24 01:41, Bryan O'Donoghue wrote:
On 12/09/2024 21:57, Vladimir Zapolskiy wrote:
3. Required not optional in the yaml

      => You can't use the PHY without its regulators

No, the supplies shall be optional, since it's absolutely possible to have
such a board, where supplies are merely not connected to the SoC.

For any _used_ PHY both supplies are certainly required.

That's what the yaml/dts check for this should achieve.

I believe it is technically possible by writing an enormously complex
scheme, when all possible "port" cases and combinations are listed.

Do you see any simpler way? Do you insist that it is utterly needed?

I asked Krzysztof about this offline.

He said something like

Quote:
This is possible, but I think not between child nodes.
https://elixir.bootlin.com/linux/v6.11-rc7/source/Documentation/devicetree/bindings/example-schema.yaml#L194

You could require something in children, but not in parent node. For
children something around:
https://elixir.bootlin.com/linux/v6.4-rc7/source/Documentation/devicetree/bindings/net/qcom,ipa.yaml#L174

allOf:
  - if:
      required:
        - something-in-parent
    then:
      properties:
        child-node:
          required:
            - something-in-child

I will see if I can turn that into a workable proposal/patch.

---
bod




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux