Re: [PATCH v2 2/5] clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/09/2024 07:31, Taniya Das wrote:
> 
> 
> On 8/17/2024 2:55 PM, Krzysztof Kozlowski wrote:
>> On 16/08/2024 10:32, Taniya Das wrote:
>>> On the QCM6490 boards the LPASS firmware controls the complete clock
>>> controller functionalities. But the LPASS resets are required to be
>>> controlled from the high level OS. The Audio SW driver should be able to
>>> assert/deassert the audio resets as required. Thus in clock driver add
>>> support for the resets.
>>>
>>> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
>>> ---
>>>   drivers/clk/qcom/lpassaudiocc-sc7280.c | 23 +++++++++++++++++++----
>>>   1 file changed, 19 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/clk/qcom/lpassaudiocc-sc7280.c b/drivers/clk/qcom/lpassaudiocc-sc7280.c
>>> index 45e726477086..b64393089263 100644
>>> --- a/drivers/clk/qcom/lpassaudiocc-sc7280.c
>>> +++ b/drivers/clk/qcom/lpassaudiocc-sc7280.c
>>> @@ -1,6 +1,7 @@
>>>   // SPDX-License-Identifier: GPL-2.0-only
>>>   /*
>>>    * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
>>>    */
>>>   
>>>   #include <linux/clk-provider.h>
>>> @@ -713,14 +714,24 @@ static const struct qcom_reset_map lpass_audio_cc_sc7280_resets[] = {
>>>   	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
>>>   };
>>>   
>>> +static const struct regmap_config lpass_audio_cc_sc7280_reset_regmap_config = {
>>> +	.name = "lpassaudio_cc_reset",
>>> +	.reg_bits = 32,
>>> +	.reg_stride = 4,
>>> +	.val_bits = 32,
>>> +	.fast_io = true,
>>> +	.max_register = 0xc8,
>>> +};
>>> +
>>>   static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
>>> -	.config = &lpass_audio_cc_sc7280_regmap_config,
>>> +	.config = &lpass_audio_cc_sc7280_reset_regmap_config,
>>>   	.resets = lpass_audio_cc_sc7280_resets,
>>>   	.num_resets = ARRAY_SIZE(lpass_audio_cc_sc7280_resets),
>>>   };
>>>   
>>>   static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = {
>>> -	{ .compatible = "qcom,sc7280-lpassaudiocc" },
>>> +	{ .compatible = "qcom,qcm6490-lpassaudiocc", .data = &lpass_audio_cc_reset_sc7280_desc },
>>
>> That's odd to see sc7280 reset added for qcm6490, but not used fot
>> sc7280 at all. Didn't you mean here lpass_audio_cc_qcm6409_desc?
>>
>>
> The resets descriptor(lpass_audio_cc_reset_sc7280_desc) is not part of 
> the global clock descriptor(lpass_cc_sc7280_desc) as these are part of 
> different regmaps.
> 
> On a non-QCM6490(SC7280) boards the resets are registered after the 
> global descriptor is registered.
> 
> But on QCM6490 board we need to register only the reset descriptor and 
> no clocks are to be handled/registered and thus passed the match data 
> for QCM6490 boards only.

Yeah, but why this is sc7280?

Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux