Re: [PATCH 5/5] arm64: dts: qcom: sa8775p: add display dt nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 12, 2024 at 12:44:37PM GMT, Mahadevan wrote:
> Add mdss and mdp DT nodes for SA8775P.
> 
> Signed-off-by: Mahadevan <quic_mahap@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 85 +++++++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 67ba124d20f8..d5d8e02fdb29 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -6,6 +6,7 @@
>  #include <dt-bindings/interconnect/qcom,icc.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
>  #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>  #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>  #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
> @@ -2937,6 +2938,90 @@ camcc: clock-controller@ade0000 {
>  			#power-domain-cells = <1>;
>  		};
>  
> +		mdss0: display-subsystem@ae00000 {

Is there going to be mdss1?

> +			compatible = "qcom,sa8775p-mdss";
> +			reg = <0x0 0x0ae00000 0x0 0x1000>;
> +			reg-names = "mdss";
> +
> +			/* same path used twice */
> +			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> +					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
> +			interconnect-names = "mdp0-mem",
> +					     "mdp1-mem",
> +					     "cpu-cfg";
> +
> +			power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
> +
> +			clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> +				 <&gcc GCC_DISP_HF_AXI_CLK>,
> +				 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
> +
> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			iommus = <&apps_smmu 0x1000 0x402>;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			status = "disabled";
> +
> +			mdss0_mdp: display-controller@ae01000 {
> +				compatible = "qcom,sa8775p-dpu";
> +				reg = <0x0 0x0ae01000 0x0 0x8f000>,
> +				      <0x0 0x0aeb0000 0x0 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +					<&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> +					<&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
> +					<&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
> +					<&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;

Wrong indentation

> +				clock-names = "bus",
> +					      "iface",
> +					      "lut",
> +					      "core",
> +					      "vsync";
> +
> +				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <19200000>;
> +
> +				operating-points-v2 = <&mdss0_mdp_opp_table>;
> +				power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <0>;
> +
> +				mdss0_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +
> +					opp-575000000 {
> +						opp-hz = /bits/ 64 <575000000>;
> +						required-opps = <&rpmhpd_opp_turbo>;
> +					};
> +
> +					opp-650000000 {
> +						opp-hz = /bits/ 64 <650000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};
> +				};
> +			};
> +		};
> +
>  		dispcc0: clock-controller@af00000 {
>  			compatible = "qcom,sa8775p-dispcc0";
>  			reg = <0x0 0x0af00000 0x0 0x20000>;
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux