Re: [PATCH v2 1/8] serial: qcom-geni: fix fifo polling timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Sep 6, 2024 at 6:15 AM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
>
> The qcom_geni_serial_poll_bit() can be used to wait for events like
> command completion and is supposed to wait for the time it takes to
> clear a full fifo before timing out.
>
> As noted by Doug, the current implementation does not account for start,
> stop and parity bits when determining the timeout. The helper also does
> not currently account for the shift register and the two-word
> intermediate transfer register.
>
> A too short timeout can specifically lead to lost characters when
> waiting for a transfer to complete as the transfer is cancelled on
> timeout.
>
> Instead of determining the poll timeout on every call, store the fifo
> timeout when updating it in set_termios() and make sure to take the
> shift and intermediate registers into account. Note that serial core has
> already added a 20 ms margin to the fifo timeout.
>
> Also note that the current uart_fifo_timeout() interface does
> unnecessary calculations on every call and did not exist in earlier
> kernels so only store its result once. This facilitates backports too as
> earlier kernels can derive the timeout from uport->timeout, which has
> since been removed.
>
> Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
> Cc: stable@xxxxxxxxxxxxxxx      # 4.17
> Reported-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Tested-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  drivers/tty/serial/qcom_geni_serial.c | 31 +++++++++++++++------------
>  1 file changed, 17 insertions(+), 14 deletions(-)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux