Requirements:
In QCE crypto driver we are accessing the crypto engine registers
directly via CPU read/write. Trust Zone could possibly to perform some
crypto operations simultaneously, a race condition will be created and
this could result in undefined behavior.
To avoid this behavior we need to use BAM HW LOCK/UNLOCK feature on BAM
pipes, and this LOCK/UNLOCK will be set via sending a command descriptor,
where the HLOS/TZ QCE crypto driver prepares a command descriptor with a
dummy write operation on one of the QCE crypto engine register and pass
the LOCK/UNLOCK flag along with it.
This feature tested with tcrypt.ko and "libkcapi" with all the AES
algorithm supported by QCE crypto engine. Tested on IPQ9574 and
qcm6490.LE chipset.
insmod tcrypt.ko mode=101
insmod tcrypt.ko mode=102
insmod tcrypt.ko mode=155
insmod tcrypt.ko mode=180
insmod tcrypt.ko mode=181
insmod tcrypt.ko mode=182
insmod tcrypt.ko mode=185
insmod tcrypt.ko mode=186
insmod tcrypt.ko mode=212
insmod tcrypt.ko mode=216
insmod tcrypt.ko mode=403
insmod tcrypt.ko mode=404
insmod tcrypt.ko mode=500
insmod tcrypt.ko mode=501
insmod tcrypt.ko mode=502
insmod tcrypt.ko mode=600
insmod tcrypt.ko mode=601
insmod tcrypt.ko mode=602
Encryption command line:
./kcapi -x 1 -e -c "cbc(aes)" -k
8d7dd9b0170ce0b5f2f8e1aa768e01e91da8bfc67fd486d081b28254c99eb423 -i
7fbc02ebf5b93322329df9bfccb635af -p 48981da18e4bb9ef7e2e3162d16b1910
* 8b19050f66582cb7f7e4b6c873819b71
*
Decryption command line:
* $ ./kcapi -x 1 -c "cbc(aes)" -k
3023b2418ea59a841757dcf07881b3a8def1c97b659a4dad -i
95aa5b68130be6fcf5cabe7d9f898a41 -q c313c6b50145b69a77b33404cb422598
* 836de0065f9d6f6a3dd2c53cd17e33a
* $ ./kcapi -x 3 -c sha256 -p 38f86d
* cc42f645c5aa76ac3154b023359b665375fc3ae42f025fe961fb0f65205ad70e
* $ ./kcapi -x 3 -c sha256 -p bbb300ac5eda9d
* 61f7b48577a613fbdfe0d6d90b49985e07a42c99e7a439b6efb76d5ec71b3d30
./kcapi -x 12 -c "hmac(sha256)" -k
0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b -i
000102030405060708090a0b0c -p f0f1f2f3f4f5f6f7f8f9 -b 42
*
3cb25f25faacd57a90434f64d0362f2a2d2d0a90cf1a5a4c5db02d56ecc4c5bf3400720
8d5b887185865
Paraller test with two different EE's (Execution Environment)
EE1 (Trust Zone) EE2 (HLOS)
There is a TZ application which "libkcapi" or "tcrypt.ko" will run in
will do continuous enc/dec with continuous loop to do enc/dec with
different AES algorithm supported different algorithm supported QCE
by QCE crypto engine. crypto engine.
1) dummy write with LOCK bit set 1) dummy write with LOCK bit set
2) bam will lock all other pipes 2) bam will lock all other pipes which
which not belongs to current not belongs to current EE's, i.e tz
EE's, i.e HLOS pipe and keep pipe and keep handling current
handling current pipe only. pipe only.
3) hlos prepare data descriptor and
3) tz prepare data descriptor submit to CE5
and submit to CE5 4) dummy write with UNLOCK bit set
4) dummy write with UNLOCK bit 5) bam will release all the locked
set pipes
5) bam will release all the locked
pipes
Upon encountering a descriptor with Lock bit set, the BAM will lock all
other pipes not related to the current pipe group, and keep handling the
current pipe only until it sees the Un-Lock set (then it will release all
locked pipes). The actual locking is done on the new descriptor fetching
for publishing, i.e. locked pipe will not fetch new descriptors even if
it got event/events adding more descriptors for this pipe.
v4:
* Added feature description and test hardware
with test command
* Fixed patch version numbering
* Dropped dt-binding patch
* Dropped device tree changes
* Added BAM_SW_VERSION register read
* Handled the error path for the api dma_map_resource()
in probe
* updated the commit messages for batter redability
* Squash the change where qce_bam_acquire_lock() and
qce_bam_release_lock() api got introduce to the change where
the lock/unlock flag get introced
* changed cover letter subject heading to
"dmaengine: qcom: bam_dma: add cmd descriptor support"
* Added the very initial post for BAM lock/unlock patch link
as v1 to track this feature
v3:
* https://lore.kernel.org/lkml/183d4f5e-e00a-8ef6-a589-f5704bc83d4a@xxxxxxxxxxx/
* Addressed all the comments from v2
* Added the dt-binding
* Fix alignment issue
* Removed type casting from qce_write_reg_dma()
and qce_read_reg_dma()
* Removed qce_bam_txn = dma->qce_bam_txn; line from
qce_alloc_bam_txn() api and directly returning
dma->qce_bam_txn
v2:
* https://lore.kernel.org/lkml/20231214114239.2635325-1-quic_mdalam@xxxxxxxxxxx/
* Initial set of patches for cmd descriptor support
* Add client driver to use BAM lock/unlock feature
* Added register read/write via BAM in QCE Crypto driver
to use BAM lock/unlock feature
v1:
* https://lore.kernel.org/all/1608215842-15381-1-git-send-email-mdalam@xxxxxxxxxxxxxx/
* Initial support for LOCK/UNLOCK in bam_dma driver
Md Sadre Alam (11):
dmaengine: qcom: bam_dma: Add bam_sw_version register read
dmaengine: qcom: bam_dma: add LOCK & UNLOCK flag support
crypto: qce - Add support for crypto address read
crypto: qce - Add bam dma support for crypto register r/w
crypto: qce - Convert register r/w for skcipher via BAM/DMA
crypto: qce - Convert register r/w for sha via BAM/DMA
crypto: qce - Convert register r/w for aead via BAM/DMA
crypto: qce - Add LOCK and UNLOCK flag support
crypto: qce - Add support for lock/unlock in skcipher
crypto: qce - Add support for lock/unlock in sha
crypto: qce - Add support for lock/unlock in aead
drivers/crypto/qce/aead.c | 4 +
drivers/crypto/qce/common.c | 141 +++++++++++++++------
drivers/crypto/qce/core.c | 14 +-
drivers/crypto/qce/core.h | 12 ++
drivers/crypto/qce/dma.c | 232 ++++++++++++++++++++++++++++++++++
drivers/crypto/qce/dma.h | 26 +++-
drivers/crypto/qce/sha.c | 4 +
drivers/crypto/qce/skcipher.c | 4 +
drivers/dma/qcom/bam_dma.c | 33 ++++-
include/linux/dmaengine.h | 6 +
10 files changed, 431 insertions(+), 45 deletions(-)
--
2.34.1
