[PATCH v2 0/5] Microsoft Surface Pro 9 5G support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series brings support for the SC8280XP-based Microsoft Surface
Pro 9 5G.

Signed-off-by: Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx>
---
Changes in v2:
- Style fixes
- Rename the devicetree to sc8280xp-microsoft-arcata.dts
- Update the audio nodes to use codec@ instead of wcd9380-rx or -tx
- Document which node corresponds to which physical USB Type-C port
- Reordering to get property-0 followed by property-names consistently
- Add a dedicated Wi-Fi calibration variant
- Remove gpio-reserved-ranges in tlmm node as not needed to boot
- Add support for Surface Pro 9 5G in surface_aggregator_registry.c
- Switch to the upstream "microsoft,surface-sam" binding
- Fix uart18 clock from S1 to S2
- Include Acked-by: and Reviewed-by: tags
- Link to v1: https://lore.kernel.org/all/20240903224252.6207-1-jerome.debretagne@xxxxxxxxx/

---
Jérôme de Bretagne (5):
  dt-bindings: arm: qcom: Document Microsoft Surface Pro 9 5G
  firmware: qcom: scm: Allow QSEECOM on Microsoft Surface Pro 9 5G
  platform/surface: aggregator_registry: Add Surface Pro 9 5G
  arm64: dts: qcom: sc8280xp: Add uart18
  arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G

 .../devicetree/bindings/arm/qcom.yaml         |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../dts/qcom/sc8280xp-microsoft-arcata.dts    | 1032 +++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |   48 +
 drivers/firmware/qcom/qcom_scm.c              |    1 +
 .../surface/surface_aggregator_registry.c     |   17 +
 6 files changed, 1100 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts

-- 
2.45.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux