On Sat, Sep 07, 2024 at 06:25:21PM GMT, Abel Vesa wrote: > Enable runtime PM support by adding proper ops which will handle the > clocks and regulators. These resources will now be handled on power_on and > power_off instead of init and exit PHY ops. Also enable these resources on > probe in order to balance out the disabling that is happening right after. Sounds good, I assume there's a good reason for doing this? Please provide a proper problem description, as defined in: https://docs.kernel.org/process/submitting-patches.html#describe-your-changes > Prevent runtime PM from being ON by default as well. > Why? > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> > --- > drivers/phy/qualcomm/phy-qcom-edp.c | 105 ++++++++++++++++++++++++++---------- > 1 file changed, 77 insertions(+), 28 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c > index da2b32fb5b45..3affeef261bf 100644 > --- a/drivers/phy/qualcomm/phy-qcom-edp.c > +++ b/drivers/phy/qualcomm/phy-qcom-edp.c > @@ -192,14 +192,6 @@ static int qcom_edp_phy_init(struct phy *phy) > int ret; > u8 cfg8; > > - ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies); > - if (ret) > - return ret; > - > - ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks); > - if (ret) > - goto out_disable_supplies; > - > writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | > DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, > edp->edp + DP_PHY_PD_CTL); > @@ -246,11 +238,6 @@ static int qcom_edp_phy_init(struct phy *phy) > msleep(20); > > return 0; > - > -out_disable_supplies: > - regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies); > - > - return ret; > } > > static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts) > @@ -721,6 +708,8 @@ static int qcom_edp_phy_power_on(struct phy *phy) > u32 val; > u8 cfg1; > > + pm_runtime_get_sync(&phy->dev); > + > ret = edp->cfg->ver_ops->com_power_on(edp); > if (ret) > return ret; > @@ -841,6 +830,8 @@ static int qcom_edp_phy_power_off(struct phy *phy) > > writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL); > > + pm_runtime_put(&phy->dev); > + > return 0; > } > > @@ -856,23 +847,12 @@ static int qcom_edp_phy_set_mode(struct phy *phy, enum phy_mode mode, int submod > return 0; > } > > -static int qcom_edp_phy_exit(struct phy *phy) > -{ > - struct qcom_edp *edp = phy_get_drvdata(phy); > - > - clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks); > - regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies); > - > - return 0; > -} > - > static const struct phy_ops qcom_edp_ops = { > .init = qcom_edp_phy_init, > .configure = qcom_edp_phy_configure, > .power_on = qcom_edp_phy_power_on, > .power_off = qcom_edp_phy_power_off, > .set_mode = qcom_edp_phy_set_mode, > - .exit = qcom_edp_phy_exit, > .owner = THIS_MODULE, > }; > > @@ -1036,6 +1016,32 @@ static int qcom_edp_clks_register(struct qcom_edp *edp, struct device_node *np) > return devm_of_clk_add_hw_provider(edp->dev, of_clk_hw_onecell_get, data); > } > > +static int __maybe_unused qcom_edp_runtime_suspend(struct device *dev) > +{ > + struct qcom_edp *edp = dev_get_drvdata(dev); > + > + dev_err(dev, "Suspending DP phy\n"); > + > + clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks); > + regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies); > + > + return 0; > +} > + > +static int __maybe_unused qcom_edp_runtime_resume(struct device *dev) > +{ > + struct qcom_edp *edp = dev_get_drvdata(dev); > + int ret; > + > + dev_err(dev, "Resuming DP phy\n"); > + > + ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies); > + if (ret) > + return ret; > + > + return clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks); > +} > + > static int qcom_edp_phy_probe(struct platform_device *pdev) > { > struct phy_provider *phy_provider; > @@ -1091,20 +1097,57 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) > return ret; > } > > - ret = qcom_edp_clks_register(edp, pdev->dev.of_node); > - if (ret) > + ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies); > + if (ret) { > + dev_err(dev, "failed to enable regulators, err=%d\n", ret); > return ret; > + } > + > + ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks); > + if (ret) { > + dev_err(dev, "failed to enable clocks, err=%d\n", ret); > + goto err_disable_regulators; > + } > + > + ret = qcom_edp_clks_register(edp, pdev->dev.of_node); > + if (ret) { > + dev_err(dev, "failed to register PHY clocks, err=%d\n", ret); > + goto err_disable_clocks; > + } > > edp->phy = devm_phy_create(dev, pdev->dev.of_node, &qcom_edp_ops); > if (IS_ERR(edp->phy)) { > dev_err(dev, "failed to register phy\n"); > - return PTR_ERR(edp->phy); > + ret = PTR_ERR(edp->phy); > + goto err_disable_clocks; > } > > + pm_runtime_set_active(dev); > + ret = devm_pm_runtime_enable(dev); > + if (ret) > + goto err_disable_clocks; > + /* > + * Prevent runtime pm from being ON by default. Users can enable > + * it using power/control in sysfs. That is what this call do, please describe why it's done instead. Regards, Bjorn > + */ > + pm_runtime_forbid(dev); > + > + dev_set_drvdata(dev, edp); > phy_set_drvdata(edp->phy, edp); > > phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > - return PTR_ERR_OR_ZERO(phy_provider); > + if (IS_ERR(phy_provider)) > + goto err_disable_clocks; > + > + return 0; > + > +err_disable_clocks: > + clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks); > + > +err_disable_regulators: > + regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies); > + > + return ret; > } > > static const struct of_device_id qcom_edp_phy_match_table[] = { > @@ -1117,10 +1160,16 @@ static const struct of_device_id qcom_edp_phy_match_table[] = { > }; > MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table); > > +static const struct dev_pm_ops qcom_edp_pm_ops = { > + SET_RUNTIME_PM_OPS(qcom_edp_runtime_suspend, > + qcom_edp_runtime_resume, NULL) > +}; > + > static struct platform_driver qcom_edp_phy_driver = { > .probe = qcom_edp_phy_probe, > .driver = { > .name = "qcom-edp-phy", > + .pm = &qcom_edp_pm_ops, > .of_match_table = qcom_edp_phy_match_table, > }, > }; > > --- > base-commit: 9aaeb87ce1e966169a57f53a02ba05b30880ffb8 > change-id: 20240907-phy-qcom-edp-enable-runtime-pm-6fad07af8947 > > Best regards, > -- > Abel Vesa <abel.vesa@xxxxxxxxxx> > >