Newer boards should always use squashed MBN firmware instead of split
MDT+bNN. Use qcom/qcs6490/modem.mbn as the firmware for the modem on
RB3gen2.
Fixes: ac6d35b9b74c ("arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 0d45662b8028..5d0167fbc709 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -707,7 +707,7 @@ &remoteproc_cdsp {
};
&remoteproc_mpss {
- firmware-name = "qcom/qcs6490/modem.mdt";
+ firmware-name = "qcom/qcs6490/modem.mbn";
status = "okay";
};
--
2.39.2
