Re: [PATCH 3/4] soc: qcom: llcc: add errata to get bank num

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Konrad,

On 9/5/2024 9:29 PM, Konrad Dybcio wrote:
> On 3.09.2024 8:21 AM, Jingyi Wang wrote:
>> Use "num-banks" property to indicate the actual num of banks for
>> errata.
>>
>> Signed-off-by: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
>> ---
>>  drivers/soc/qcom/llcc-qcom.c | 15 ++++++++++-----
>>  1 file changed, 10 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>> index 8fa4ffd3a9b5..3fb45e625d82 100644
>> --- a/drivers/soc/qcom/llcc-qcom.c
>> +++ b/drivers/soc/qcom/llcc-qcom.c
>> @@ -1275,12 +1275,17 @@ static int qcom_llcc_probe(struct platform_device *pdev)
>>  		goto err;
>>  	cfg = &cfgs->llcc_config[cfg_index];
>>  
>> -	ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
>> -	if (ret)
>> -		goto err;
>> +	if (unlikely(!of_property_read_u32(dev->of_node, "num-banks", &num_banks))) {
>> +		/* errata: get num of llcc banks. */
>> +	} else {
>> +		ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
>> +		if (ret)
>> +			goto err;
>> +
>> +		num_banks &= LLCC_LB_CNT_MASK;
>> +		num_banks >>= LLCC_LB_CNT_SHIFT;
>> +	}
> 
> Is num-banks going to be populated by the bootloader, or hardcoded?
> 
> If the latter, we may just do so in the driver, hoping no more SoCs
> have this erratum..
> 
> Konrad

We would like modify that in driver instead of bootloader, so you suggestion
is hardcode it in struct like "qcom_llcc_config" instead of adding property
in devicetree? Please correct my if there is misunderstanding.

Thanks,
Jingyi






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux