[PATCH 0/6] media: dt-bindings: media: camss: Fix interrupt types

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It was discovered that on a few Qualcomm platforms types of interrupts
do not match both downstream code and a type requested by the CAMSS driver.

The mismatched interrupt type between firmware and the correspondent
CAMSS driver leads to known problems, which were discussed previously:

  https://lore.kernel.org/lkml/20220530080842.37024-4-manivannan.sadhasivam@xxxxxxxxxx/

Here the situation is right the same, namely a repeated bind of camss
device is not possible due to a wrongly specified interrupt type, and
it may lead to an issue in runtime manifested like this:

  irq: type mismatch, failed to map hwirq-509 for interrupt-controller@17a00000!

Vladimir Zapolskiy (6):
  media: dt-bindings: media: qcom,sc8280xp-camss: Fix interrupt types
  media: dt-bindings: media: qcom,sdm845-camss: Fix interrupt types
  media: dt-bindings: media: qcom,sm8250-camss: Fix interrupt types
  arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
  arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
  arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts

 .../bindings/media/qcom,sc8280xp-camss.yaml   | 40 +++++++++----------
 .../bindings/media/qcom,sdm845-camss.yaml     | 20 +++++-----
 .../bindings/media/qcom,sm8250-camss.yaml     | 28 ++++++-------
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 40 +++++++++----------
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 20 +++++-----
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 28 ++++++-------
 6 files changed, 88 insertions(+), 88 deletions(-)

-- 
2.45.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux