Re: [PATCH] arm64: dts: qcom: sa8775p-ride: add WiFi/BT nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 05, 2024 at 02:48:17PM GMT, Miaoqing Pan wrote:
> Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
> board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
> 
> Signed-off-by: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 119 +++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi      |   2 +-
>  2 files changed, 120 insertions(+), 1 deletion(-)
> 
> @@ -837,3 +939,20 @@ &usb_2_hsphy {
>  &xo_board_clk {
>  	clock-frequency = <38400000>;
>  };
> +
> +&pcieport0 {
> +	wifi@0 {
> +		compatible = "pci17cb,1101";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;

Please add

qcom,ath11k-calibration-variant = "name";

> +	};
> +};

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux