Re: [PATCH v3 3/4] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 5 Sept 2024 at 15:20, Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
> and bluetooth nodes to consume the PMU's outputs.
>
> Tested-by: Steev Klimaszewski <steev@xxxxxxxx> # Thinkpad X13s
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 98 ++++++++++++++++---
>  1 file changed, 86 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 6a28cab97189..88b31550f9df 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -400,6 +400,67 @@ usb1_sbu_mux: endpoint {
>                         };
>                 };
>         };
> +
> +       wcn6855-pmu {
> +               compatible = "qcom,wcn6855-pmu";
> +
> +               pinctrl-0 = <&wlan_en>;

pinctrl for the bt-enable pin?

> +               pinctrl-names = "default";
> +
> +               wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> +               bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
> +

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux