We like to order node names alphabetically, to aid in this we should
prefer naming nodes with the node type (connector, regulator, etc) at
the start, so we can group similar types together.
Adjust this on rb3gen2 so we can group connectors and regulators
together.
Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 0d45662b8028..513d5265bb13 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -37,9 +37,9 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
- dp-connector {
+ connector-dp {
compatible = "dp-connector";
label = "DP";
type = "mini";
@@ -51,9 +51,9 @@ dp_connector_in: endpoint {
};
};
};
- hdmi-connector {
+ connector-hdmi {
compatible = "hdmi-connector";
type = "a";
port {
@@ -195,9 +195,9 @@ pmic_glink_sbu_in: endpoint {
};
};
};
- vph_pwr: vph-pwr-regulator {
+ vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
--
2.46.0
