Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 04, 2024 at 12:41:59PM +0530, Manivannan Sadhasivam via B4 Relay wrote:
> From: Shashank Babu Chinta Venkata <quic_schintav@xxxxxxxxxxx>
> 
> During high data transmission rates such as 16.0 GT/s, there is an
> increased risk of signal loss due to poor channel quality and interference.
> This can impact receiver's ability to capture signals accurately. Hence,
> signal compensation is achieved through appropriate lane equalization
> settings at both transmitter and receiver. This will result in increased
> PCIe signal strength.
> 
> Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@xxxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> [mani: dropped the code refactoring and minor changes]
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
 
> +#define GEN3_EQ_CONTROL_OFF			0x8a8

Nit: uppercase hex since that's what is used for the other offsets

> +#define GEN3_EQ_CONTROL_OFF_FB_MODE		GENMASK(3, 0)
> +#define GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE	BIT(4)
> +#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC	GENMASK(23, 8)
> +#define GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL	BIT(24)
> +
> +#define GEN3_EQ_FB_MODE_DIR_CHANGE_OFF          0x8ac

Nit: odd indentation uses spaces, uppercase

> +#define GEN3_EQ_FMDC_T_MIN_PHASE23		GENMASK(4, 0)
> +#define GEN3_EQ_FMDC_N_EVALS			GENMASK(9, 5)
> +#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA	GENMASK(13, 10)
> +#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA	GENMASK(17, 14)
> +
>  #define PCIE_PORT_MULTI_LANE_CTRL	0x8C0
>  #define PORT_MLTI_UPCFG_SUPPORT		BIT(7)
>  
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c
> new file mode 100644
> index 000000000000..dc7d93db9dc5
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-qcom-common.c
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/pci.h>
> +
> +#include "pcie-designware.h"
> +#include "pcie-qcom-common.h"
> +
> +void qcom_pcie_common_set_16gt_eq_settings(struct dw_pcie *pci)
> +{
> +	u32 reg;
> +
> +	/*
> +	 * GEN3_RELATED_OFF register is repurposed to apply equalization
> +	 * settings at various data transmission rates through registers namely
> +	 * GEN3_EQ_*. RATE_SHADOW_SEL bit field of GEN3_RELATED_OFF determines
> +	 * data rate for which this equalization settings are applied.

*The* RATE_SHADOW_SEL bit field

*the* data rate

s/this/these/

> +	 */
> +	reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> +	reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
> +	reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
> +	reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK, 0x1);

How does 0x1 map to gen4/16 GT?

> +	dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
> +
> +	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
> +	reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
> +		GEN3_EQ_FMDC_N_EVALS |
> +		GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
> +		GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
> +	reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
> +		FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
> +		FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
> +		FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
> +	dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
> +
> +	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
> +	reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
> +		GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
> +		GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
> +		GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
> +	dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
> +}
> +EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_eq_settings);
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.h b/drivers/pci/controller/dwc/pcie-qcom-common.h
> new file mode 100644
> index 000000000000..259e04b7bdf9
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-qcom-common.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "pcie-designware.h"

You only need a forward declaration:

	struct dw_pcie;

> +
> +void qcom_pcie_common_set_16gt_eq_settings(struct dw_pcie *pci);

Compile guard still missing.

Johan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux