On Tue, Sep 03, 2024 at 11:36:28AM GMT, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
> and bluetooth nodes to consume the PMU's outputs.
>
> Tested-by: Steev Klimaszewski <steev@xxxxxxxx> # Thinkpad X13s
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 98 ++++++++++++++++---
> 1 file changed, 86 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 6a28cab97189..88b31550f9df 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -400,6 +400,67 @@ usb1_sbu_mux: endpoint {
> };
> };
> };
> +
> + wcn6855-pmu {
> + compatible = "qcom,wcn6855-pmu";
> +
> + pinctrl-0 = <&wlan_en>;
> + pinctrl-names = "default";
> +
> + wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> + bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
> +
> + vddio-supply = <&vreg_s10b>;
> + vddaon-supply = <&vreg_s12b>;
> + vddpmu-supply = <&vreg_s12b>;
> + vddrfa0p95-supply = <&vreg_s12b>;
> + vddrfa1p3-supply = <&vreg_s11b>;
> + vddrfa1p9-supply = <&vreg_s1c>;
> + vddpcie1p3-supply = <&vreg_s11b>;
> + vddpcie1p9-supply = <&vreg_s1c>;
As the WiFi is now properly using the PMU, should we also remove some of
the regulator-always-on properties?
> +
--
With best wishes
Dmitry
