On 5/23/2016 01:25 PM, Mark Rutland wrote:
> On Fri, May 20, 2016 at 03:13:07PM -0400, Neil Leeder wrote:
>> L2 registers are accessed using a select register and data
>> register pair. To prevent multiple concurrent writes to the
>> select register by independent drivers, the write to the
>> select register and the associated access of the data register
>> are protected with a lock. All drivers accessing the L2
>> registers use the set and get functions provided by
>> l2-accessors to ensure correct reads and writes to L2 registers.
>
> What will this be used for? (i.e. which drivers want to touch the L2
> registers?).
>
> Generally we expect FW to configure the caches and interconnect
> appropriately.
The primary use is in the L2 PMU driver, which will be posted shortly.
>
>> Signed-off-by: Neil Leeder <nleeder@xxxxxxxxxxxxxx>
>> ---
>> drivers/soc/qcom/Kconfig | 9 +++++
>> drivers/soc/qcom/Makefile | 1 +
>> drivers/soc/qcom/l2-accessors.c | 66 +++++++++++++++++++++++++++++++++++
>> include/linux/soc/qcom/l2-accessors.h | 27 ++++++++++++++
>> 4 files changed, 103 insertions(+)
>> create mode 100644 drivers/soc/qcom/l2-accessors.c
>> create mode 100644 include/linux/soc/qcom/l2-accessors.h
>
> These are awfully generic file names (and function names). Which SoCs
> does this apply to?
>
> It would be good to give these more specific names.
It's under soc/qcom, and dependent on ARCH_QCOM and (in v2) also on ARM64. It applies to all QCOM ARM64 SoCs.
Given that it can only be used in a QCOM driver, and the include path has qcom in it, I'd
prefer not to add redundancy by adding another qcom in there.
>> diff --git a/include/linux/soc/qcom/l2-accessors.h b/include/linux/soc/qcom/l2-accessors.h
>> new file mode 100644
>> index 0000000..563c114
>> --- /dev/null
>> +++ b/include/linux/soc/qcom/l2-accessors.h
>> @@ -0,0 +1,27 @@
>> +/*
>> + * Copyright (c) 2011-2016 The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>
>> +#ifndef __QCOM_L2_ACCESSORS_H
>> +#define __QCOM_L2_ACCESSORS_H
>> +
>> +#ifdef CONFIG_QCOM_L2_ACCESSORS
>> +void set_l2_indirect_reg(u64 reg_addr, u64 val);
>> +u64 get_l2_indirect_reg(u64 reg_addr);
>> +#else
>> +static inline void set_l2_indirect_reg(u64 reg_addr, u64 val) {}
>> +static inline u64 get_l2_indirect_reg(u64 reg_addr)
>> +{
>> + return 0;
>> +}
>
> Surely it would be better to error out on any unintentional use of these
> at build time?
This allows building code which is common to ARM SoCs and QCOM SoCs without having to ifdef out the
QCOM-specific pieces.
>
> Thanks,
> Mark.
>
Thanks,
Neil
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
