Re: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: Enable external DP support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 02, 2024 at 06:01:35PM GMT, Abel Vesa wrote:
> The Qualcomm Snapdragon X Elite CRD board has 3 USB Type-C ports,
> all of them supporting external DP altmode. Between each QMP
> combo PHY and the corresponding Type-C port, sits one Parade PS8830
> retimer which handles both orientation and SBU muxing. Add nodes for
> each retimer, fix the graphs between connectors and the PHYs accordingly,
> add the voltage regulators needed by each retimer and then enable all
> 3 remaining DPUs.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 414 +++++++++++++++++++++++++++++-
>  1 file changed, 408 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index 10b28d870f08..6dfc85eda354 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts

[skipped]


> @@ -709,6 +861,163 @@ keyboard@3a {
>  	};
>  };
>  
> +&i2c1 {
> +	clock-frequency = <400000>;
> +
> +	status = "okay";
> +
> +	typec-mux@8 {
> +		compatible = "parade,ps8830";
> +		reg = <0x08>;
> +
> +		clocks = <&rpmhcc RPMH_RF_CLK5>;
> +		clock-names = "xo";
> +
> +		vdd15-supply = <&vreg_rtmr2_1p15>;
> +		vdd18-supply = <&vreg_rtmr2_1p8>;
> +		vdd33-supply = <&vreg_rtmr2_3p3>;
> +
> +		reset-gpios = <&tlmm 185 GPIO_ACTIVE_HIGH>;
> +
> +		orientation-switch;
> +		retimer-switch;

Doesn't it need to listen to mode switching events? 4-lane DP vs
2/2-lane DP + USB3 requires propagating of the altmode events to the QMP
PHY, see the original 4-lane series.

> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				retimer_ss2_ss_out: endpoint {
> +					remote-endpoint = <&pmic_glink_ss2_ss_in>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				retimer_ss2_ss_in: endpoint {
> +					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
> +				};
> +			};
> +
> +			port@2 {
> +				reg = <2>;
> +
> +				retimer_ss2_con_sbu_out: endpoint {
> +					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
> +				};
> +			};
> +		};
> +	};
> +};
> +


> @@ -1164,7 +1566,7 @@ &usb_1_ss0_dwc3_hs {
>  };
>  
>  &usb_1_ss0_qmpphy_out {
> -	remote-endpoint = <&pmic_glink_ss0_ss_in>;
> +	remote-endpoint = <&retimer_ss0_ss_in>;
>  };

orientation-switch and mode-switch for the QMP PHY?

>  
>  &usb_1_ss1_hsphy {
> @@ -1196,7 +1598,7 @@ &usb_1_ss1_dwc3_hs {
>  };
>  
>  &usb_1_ss1_qmpphy_out {
> -	remote-endpoint = <&pmic_glink_ss1_ss_in>;
> +	remote-endpoint = <&retimer_ss1_ss_in>;
>  };
>  
>  &usb_1_ss2_hsphy {
> @@ -1228,5 +1630,5 @@ &usb_1_ss2_dwc3_hs {
>  };
>  
>  &usb_1_ss2_qmpphy_out {
> -	remote-endpoint = <&pmic_glink_ss2_ss_in>;
> +	remote-endpoint = <&retimer_ss2_ss_in>;
>  };
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux