From: Douglas Anderson <dianders@xxxxxxxxxxxx> For UART devices the M_GP_LENGTH is the TX word count. For other devices this is the transaction word count. For UART devices the S_GP_LENGTH is the RX word count. The IRQ_EN set/clear registers allow you to set or clear bits in the IRQ_EN register without needing a read-modify-write. Acked-by: Bjorn Andersson <andersson@xxxxxxxxxx> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- include/linux/soc/qcom/geni-se.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h index 0f038a1a0330..c3bca9c0bf2c 100644 --- a/include/linux/soc/qcom/geni-se.h +++ b/include/linux/soc/qcom/geni-se.h @@ -88,11 +88,15 @@ struct geni_se { #define SE_GENI_M_IRQ_STATUS 0x610 #define SE_GENI_M_IRQ_EN 0x614 #define SE_GENI_M_IRQ_CLEAR 0x618 +#define SE_GENI_M_IRQ_EN_SET 0x61c +#define SE_GENI_M_IRQ_EN_CLEAR 0x620 #define SE_GENI_S_CMD0 0x630 #define SE_GENI_S_CMD_CTRL_REG 0x634 #define SE_GENI_S_IRQ_STATUS 0x640 #define SE_GENI_S_IRQ_EN 0x644 #define SE_GENI_S_IRQ_CLEAR 0x648 +#define SE_GENI_S_IRQ_EN_SET 0x64c +#define SE_GENI_S_IRQ_EN_CLEAR 0x650 #define SE_GENI_TX_FIFOn 0x700 #define SE_GENI_RX_FIFOn 0x780 #define SE_GENI_TX_FIFO_STATUS 0x800 @@ -101,6 +105,8 @@ struct geni_se { #define SE_GENI_RX_WATERMARK_REG 0x810 #define SE_GENI_RX_RFR_WATERMARK_REG 0x814 #define SE_GENI_IOS 0x908 +#define SE_GENI_M_GP_LENGTH 0x910 +#define SE_GENI_S_GP_LENGTH 0x914 #define SE_DMA_TX_IRQ_STAT 0xc40 #define SE_DMA_TX_IRQ_CLR 0xc44 #define SE_DMA_TX_FSM_RST 0xc58 @@ -234,6 +240,9 @@ struct geni_se { #define IO2_DATA_IN BIT(1) #define RX_DATA_IN BIT(0) +/* SE_GENI_M_GP_LENGTH and SE_GENI_S_GP_LENGTH fields */ +#define GP_LENGTH GENMASK(31, 0) + /* SE_DMA_TX_IRQ_STAT Register fields */ #define TX_DMA_DONE BIT(0) #define TX_EOT BIT(1) -- 2.44.2
