From: André Apitzsch <git@xxxxxxxxxxx>
Patch "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash" has
been applied twice. This reverts the older version of the patch.
Revert the commit f98bdb21cfc9 ("arm64: dts: qcom:
msm8939-longcheer-l9100: Add rear flash")
Fixes: f98bdb21cfc9 ("arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash")
Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
.../boot/dts/qcom/msm8939-longcheer-l9100.dts | 26 ----------------------
1 file changed, 26 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index adc992ebc29d..b845da4fa23e 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -160,25 +160,6 @@ led@2 {
};
};
- flash-led-controller@53 {
- compatible = "silergy,sy7802";
- reg = <0x53>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&camera_rear_flash_default>;
- pinctrl-names = "default";
-
- led@0 {
- reg = <0>;
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- led-sources = <0>, <1>;
- };
- };
-
flash-led-controller@53 {
compatible = "silergy,sy7802";
reg = <0x53>;
@@ -364,13 +345,6 @@ camera_rear_flash_default: camera-rear-flash-default-state {
bias-disable;
};
- camera_rear_flash_default: camera-rear-flash-default-state {
- pins = "gpio9", "gpio16", "gpio51";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio20";
function = "gpio";
---
base-commit: d7b69f6e9e1c8b6acdcce3b385779eb046835dd5
change-id: 20240830-revert_flash-4e184591da15
Best regards,
--
André Apitzsch <git@xxxxxxxxxxx>
