x1e80100 SoC uses QMP phy with version v6.30 for PCIe Gen4 x8. Add the new PCS PCIE specific offsets in a dedicated header file. Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx> --- .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h new file mode 100644 index 000000000000..5a58ff197e6e --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2024 Qualcomm Innovation Center. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_30_H_ +#define QCOM_PHY_QMP_PCS_PCIE_V6_30_H_ + +/* Only for QMP V6_30 PHY - PCIE have different offsets than V6 */ +#define QPHY_PCIE_V6_30_PCS_POWER_STATE_CONFIG2 0x014 +#define QPHY_PCIE_V6_30_PCS_TX_RX_CONFIG 0x020 +#define QPHY_PCIE_V6_30_PCS_ENDPOINT_REFCLK_DRIVE 0x024 +#define QPHY_PCIE_V6_30_PCS_OSC_DTCT_ACTIONS 0x098 +#define QPHY_PCIE_V6_30_PCS_EQ_CONFIG1 0x0a8 +#define QPHY_PCIE_V6_30_PCS_G3_RXEQEVAL_TIME 0x0f8 +#define QPHY_PCIE_V6_30_PCS_G4_RXEQEVAL_TIME 0x0fc +#define QPHY_PCIE_V6_30_PCS_G4_EQ_CONFIG5 0x110 +#define QPHY_PCIE_V6_30_PCS_G4_PRE_GAIN 0x164 +#define QPHY_PCIE_V6_30_PCS_RX_MARGINING_CONFIG1 0x184 +#define QPHY_PCIE_V6_30_PCS_RX_MARGINING_CONFIG3 0x18c +#define QPHY_PCIE_V6_30_PCS_RX_MARGINING_CONFIG5 0x194 +#define QPHY_PCIE_V6_30_PCS_G3_FOM_EQ_CONFIG5 0x1b4 +#define QPHY_PCIE_V6_30_PCS_G4_FOM_EQ_CONFIG5 0x1c8 + +#endif -- 2.34.1
