[PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On all X Elite boards currently supported upstream, the NVMe sits
on the PCIe 6. Until now that has been configured in dual lane mode
only. The schematics reveal that the NVMe is actually using 4 lanes.
So add support for the 4-lane mode and document the compatible for it.

This patchset depends on:
https://lore.kernel.org/all/20240805-phy-qcom-qmp-pcie-write-all-tbls-second-port-v3-1-6967c6bf61d1@xxxxxxxxxx/

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Changes in v3:
- Moved the x1e80100_qmp_gen4x4_pcie_serdes_4ln_tbl right after
  proper serdes table, like Johan suggested
- Picked Johan's R-b tags
- Link to v2: https://lore.kernel.org/r/20240821-x1e80100-phy-add-gen4x4-v2-0-c34db42230e9@xxxxxxxxxx

Changes in v2:
- Re-worded the commit message following Johan's suggestions.
- Picked up Krzysztof's R-b tag for the bindings patch
- Link to v1: https://lore.kernel.org/r/20240531-x1e80100-phy-add-gen4x4-v1-0-5c841dae7850@xxxxxxxxxx

---
Abel Vesa (2):
      dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4
      phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100

 .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml   |  3 ++
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c           | 42 ++++++++++++++++++++++
 2 files changed, 45 insertions(+)
---
base-commit: 81528d2de965dafd6911a0f9a975fc30b25e7080
change-id: 20240531-x1e80100-phy-add-gen4x4-fa830a5505b6

Best regards,
-- 
Abel Vesa <abel.vesa@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux