Re: [PATCH v5 2/3] PCI: qcom: Add equalization settings for 16 GT/s

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 21, 2024 at 10:08:43AM -0700, Shashank Babu Chinta Venkata wrote:
> During high data transmission rates such as 16 GT/s , there is an

s/ ,/,/

> increased risk of signal loss due to poor channel quality and
> interference. This can impact receiver's ability to capture signals
> accurately. Hence, signal compensation is achieved through appropriate
> lane equalization settings at both transmitter and receiver. This will
> result in increased PCIe signal strength.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux