[PATCH v3 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The IPQ6005 SoCs and some IPQ6000 SoCs (with PMIC, no fused)[1] have
CPU frequencies up to 1.5GHz, so add this frequency.

[1] Usually the SBL version is BOOT.XF.0.3-00077-IPQ60xxLZB-2
The old version of IPQ6000 did not explicitly fused the SoC to
be 'IPQ6000', and fused the CPU frequency to 1.5GHz.

Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 1b584d9aadd1..33062417781a 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -140,6 +140,13 @@ opp-1440000000 {
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <937500>;
+			opp-supported-hw = <0x2>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux