This series depends on q6 clock removal series [1]. - Secure PIL is signed, split firmware images which only TrustZone (TZ) can authenticate and load. Linux kernel will send a request to TZ to authenticate and load the PIL images. - When secure PIL support was added to the existing wcss PIL driver earlier in [2], Bjorn suggested not to overload the existing WCSS rproc driver [2], instead post a new driver for secure PIL alone. This series adds a new secure PIL driver for the same. [1] https://patchwork.kernel.org/project/linux-arm-msm/cover/20240820055618.267554-1-quic_gokulsri@xxxxxxxxxxx/ [2] https://patchwork.kernel.org/project/linux-arm-msm/patch/1611984013-10201-3-git-send-email-gokulsri@xxxxxxxxxxxxxx/ Manikanta Mylavarapu (3): dt-bindings: remoteproc: qcom: document hexagon based WCSS secure PIL arm64: dts: qcom: ipq5332: add nodes to bringup q6 arm64: dts: qcom: ipq9574: add nodes to bring up q6 Vignesh Viswanathan (1): remoteproc: qcom: add hexagon based WCSS secure PIL driver .../remoteproc/qcom,wcss-sec-pil.yaml | 125 ++++++ arch/arm64/boot/dts/qcom/ipq5332.dtsi | 62 +++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 58 +++ drivers/remoteproc/Kconfig | 22 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/qcom_q6v5_wcss_sec.c | 360 ++++++++++++++++++ 6 files changed, 628 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml create mode 100644 drivers/remoteproc/qcom_q6v5_wcss_sec.c -- 2.34.1
