[PATCH] remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Any write access to the IMEM region when the Q6 is setting up XPU
protection on it will result in a XPU violation. Fix this by ensuring
IMEM writes related to the MBA post-mortem logs happen before the Q6
is brought out of reset.

Fixes: 318130cc9362 ("remoteproc: qcom_q6v5_mss: Add MBA log extraction support")
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 2a42215ce8e0..32c3531b20c7 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1162,6 +1162,9 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 		goto disable_active_clks;
 	}
 
+	if (qproc->has_mba_logs)
+		qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE);
+
 	writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
 	if (qproc->dp_size) {
 		writel(qproc->mba_phys + SZ_1M, qproc->rmb_base + RMB_PMI_CODE_START_REG);
@@ -1172,9 +1175,6 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	if (ret)
 		goto reclaim_mba;
 
-	if (qproc->has_mba_logs)
-		qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE);
-
 	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
 	if (ret == -ETIMEDOUT) {
 		dev_err(qproc->dev, "MBA boot timed out\n");
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux