Re: [PATCH v2 00/16] Add cmd descriptor support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 15, 2024 at 02:27:09PM GMT, Md Sadre Alam wrote:
> This series of patches will add command descriptor
> support to read/write crypto engine register via
> BAM/DMA
> 
> We need this support because if there is multiple EE's
> (Execution Environment) accessing the same CE then there
> will be race condition. To avoid this race condition
> BAM HW hsving LOC/UNLOCK feature on BAM pipes and this
> LOCK/UNLOCK will be set via command descriptor only.
> 
> Since each EE's having their dedicated BAM pipe, BAM allows
> Locking and Unlocking on BAM pipe. So if one EE's requesting
> for CE5 access then that EE's first has to LOCK the BAM pipe
> while setting LOCK bit on command descriptor and then access
> it. After finishing the request EE's has to UNLOCK the BAM pipe
> so in this way we race condition will not happen.
> 
> tested with "tcrypt.ko" and "kcapi" tool.
> 
> Need help to test these all the patches on msm platform
> 
> v2:
>  * Addressed all the comments from v1

Please describe the actual changes you're making between your versions.

>  * Added the dt-binding
>  * Added locking/unlocking mechanism in bam driver

Seems to me that this was already part of v1, as patch 6/11?

Regards,
Bjorn

> 
> v1:
>  * https://lore.kernel.org/lkml/20231214114239.2635325-1-quic_mdalam@xxxxxxxxxxx/
>  * Initial set of patches for cmd descriptor support
> 
> Md Sadre Alam (16):
>   dt-bindings: dma: qcom,bam: Add bam pipe lock
>   dmaengine: qcom: bam_dma: add bam_pipe_lock dt property
>   dmaengine: qcom: bam_dma: add LOCK & UNLOCK flag support
>   crypto: qce - Add support for crypto address read
>   crypto: qce - Add bam dma support for crypto register r/w
>   crypto: qce - Convert register r/w for skcipher via BAM/DMA
>   crypto: qce - Convert register r/w for sha via BAM/DMA
>   crypto: qce - Convert register r/w for aead via BAM/DMA
>   crypto: qce - Add LOCK and UNLOCK flag support
>   crypto: qce - Add support for lock aquire,lock release api.
>   crypto: qce - Add support for lock/unlock in skcipher
>   crypto: qce - Add support for lock/unlock in sha
>   crypto: qce - Add support for lock/unlock in aead
>   arm64: dts: qcom: ipq9574: enable bam pipe locking/unlocking
>   arm64: dts: qcom: ipq8074: enable bam pipe locking/unlocking
>   arm64: dts: qcom: ipq6018: enable bam pipe locking/unlocking
> 
>  .../devicetree/bindings/dma/qcom,bam-dma.yaml |   8 +
>  arch/arm64/boot/dts/qcom/ipq6018.dtsi         |   1 +
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi         |   1 +
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi         |   1 +
>  drivers/crypto/qce/aead.c                     |   4 +
>  drivers/crypto/qce/common.c                   | 142 +++++++----
>  drivers/crypto/qce/core.c                     |  13 +-
>  drivers/crypto/qce/core.h                     |  12 +
>  drivers/crypto/qce/dma.c                      | 232 ++++++++++++++++++
>  drivers/crypto/qce/dma.h                      |  26 +-
>  drivers/crypto/qce/sha.c                      |   4 +
>  drivers/crypto/qce/skcipher.c                 |   4 +
>  drivers/dma/qcom/bam_dma.c                    |  14 +-
>  include/linux/dmaengine.h                     |   6 +
>  14 files changed, 424 insertions(+), 44 deletions(-)
> 
> -- 
> 2.34.1
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux