Hi,
> This patch converts the Qualcomm SCM driver to use the streaming DMA
> APIs for communication buffers.
>
> Signed-off-by: Andy Gross <andy.gross@xxxxxxxxxx>
> ---
Reviewed-by: sricharan@xxxxxxxxxxxxxx
Regards,
Sricharan
> drivers/firmware/qcom_scm-32.c | 152
+++++++++++++------------------------
> ----
> drivers/firmware/qcom_scm.c | 6 +-
> drivers/firmware/qcom_scm.h | 10 +--
> 3 files changed, 58 insertions(+), 110 deletions(-)
>
> diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-
> 32.c index 4388d13..3e71aec 100644
> --- a/drivers/firmware/qcom_scm-32.c
> +++ b/drivers/firmware/qcom_scm-32.c
> @@ -23,8 +23,7 @@
> #include <linux/errno.h>
> #include <linux/err.h>
> #include <linux/qcom_scm.h>
> -
> -#include <asm/cacheflush.h>
> +#include <linux/dma-mapping.h>
>
> #include "qcom_scm.h"
>
> @@ -97,44 +96,6 @@ struct qcom_scm_response { };
>
> /**
> - * alloc_qcom_scm_command() - Allocate an SCM command
> - * @cmd_size: size of the command buffer
> - * @resp_size: size of the response buffer
> - *
> - * Allocate an SCM command, including enough room for the command
> - * and response headers as well as the command and response buffers.
> - *
> - * Returns a valid &qcom_scm_command on success or %NULL if the
> allocation fails.
> - */
> -static struct qcom_scm_command *alloc_qcom_scm_command(size_t
> cmd_size, size_t resp_size) -{
> - struct qcom_scm_command *cmd;
> - size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) +
> cmd_size +
> - resp_size;
> - u32 offset;
> -
> - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
> - if (cmd) {
> - cmd->len = cpu_to_le32(len);
> - offset = offsetof(struct qcom_scm_command, buf);
> - cmd->buf_offset = cpu_to_le32(offset);
> - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
> - }
> - return cmd;
> -}
> -
> -/**
> - * free_qcom_scm_command() - Free an SCM command
> - * @cmd: command to free
> - *
> - * Free an SCM command.
> - */
> -static inline void free_qcom_scm_command(struct qcom_scm_command
> *cmd) -{
> - kfree(cmd);
> -}
> -
> -/**
> * qcom_scm_command_to_response() - Get a pointer to a
> qcom_scm_response
> * @cmd: command
> *
> @@ -168,7 +129,7 @@ static inline void
> *qcom_scm_get_response_buffer(const struct qcom_scm_response
> return (void *)rsp + le32_to_cpu(rsp->buf_offset); }
>
> -static u32 smc(u32 cmd_addr)
> +static u32 smc(dma_addr_t cmd_addr)
> {
> int context_id;
> register u32 r0 asm("r0") = 1;
> @@ -192,51 +153,15 @@ static u32 smc(u32 cmd_addr)
> return r0;
> }
>
> -static int __qcom_scm_call(const struct qcom_scm_command *cmd) -{
> - int ret;
> - u32 cmd_addr = virt_to_phys(cmd);
> -
> - /*
> - * Flush the command buffer so that the secure world sees
> - * the correct data.
> - */
> - secure_flush_area(cmd, cmd->len);
> -
> - ret = smc(cmd_addr);
> - if (ret < 0)
> - ret = qcom_scm_remap_error(ret);
> -
> - return ret;
> -}
> -
> -static void qcom_scm_inv_range(unsigned long start, unsigned long end) -{
> - u32 cacheline_size, ctr;
> -
> - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
> - cacheline_size = 4 << ((ctr >> 16) & 0xf);
> -
> - start = round_down(start, cacheline_size);
> - end = round_up(end, cacheline_size);
> - outer_inv_range(start, end);
> - while (start < end) {
> - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
> - : "memory");
> - start += cacheline_size;
> - }
> - dsb();
> - isb();
> -}
> -
> /**
> * qcom_scm_call() - Send an SCM command
> - * @svc_id: service identifier
> - * @cmd_id: command identifier
> - * @cmd_buf: command buffer
> - * @cmd_len: length of the command buffer
> - * @resp_buf: response buffer
> - * @resp_len: length of the response buffer
> + * @dev: struct device
> + * @svc_id: service identifier
> + * @cmd_id: command identifier
> + * @cmd_buf: command buffer
> + * @cmd_len: length of the command buffer
> + * @resp_buf: response buffer
> + * @resp_len: length of the response buffer
> *
> * Sends a command to the SCM and waits for the command to finish
> processing.
> *
> @@ -247,42 +172,60 @@ static void qcom_scm_inv_range(unsigned long
> start, unsigned long end)
> * and response buffers is taken care of by qcom_scm_call; however,
callers
> are
> * responsible for any other cached buffers passed over to the secure
world.
> */
> -static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
> - size_t cmd_len, void *resp_buf, size_t resp_len)
> +static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
> + const void *cmd_buf, size_t cmd_len, void
> *resp_buf,
> + size_t resp_len)
> {
> int ret;
> struct qcom_scm_command *cmd;
> struct qcom_scm_response *rsp;
> - unsigned long start, end;
> + size_t alloc_len = sizeof(*cmd) + sizeof(struct qcom_scm_response) +
> + cmd_len + resp_len;
> + dma_addr_t cmd_phys;
> + u32 offset;
>
> - cmd = alloc_qcom_scm_command(cmd_len, resp_len);
> + cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
> if (!cmd)
> return -ENOMEM;
>
> + cmd->len = cpu_to_le32(alloc_len);
> + offset = offsetof(struct qcom_scm_command, buf);
> + cmd->buf_offset = cpu_to_le32(offset);
> + cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_len);
> +
> cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
> if (cmd_buf)
> memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf,
> cmd_len);
>
> + cmd_phys = dma_map_single(dev, cmd, alloc_len,
> DMA_TO_DEVICE);
> + if (dma_mapping_error(dev, cmd_phys)) {
> + kfree(cmd);
> + return -ENOMEM;
> + }
> +
> mutex_lock(&qcom_scm_lock);
> - ret = __qcom_scm_call(cmd);
> + ret = smc(cmd_phys);
> + if (ret < 0)
> + ret = qcom_scm_remap_error(ret);
> mutex_unlock(&qcom_scm_lock);
> if (ret)
> goto out;
>
> rsp = qcom_scm_command_to_response(cmd);
> - start = (unsigned long)rsp;
>
> do {
> - qcom_scm_inv_range(start, start + sizeof(*rsp));
> + dma_sync_single_for_cpu(dev, cmd_phys + cmd_len +
> offset,
> + sizeof(*rsp), DMA_FROM_DEVICE);
> } while (!rsp->is_complete);
>
> - end = (unsigned long)qcom_scm_get_response_buffer(rsp) +
> resp_len;
> - qcom_scm_inv_range(start, end);
> -
> - if (resp_buf)
> + if (resp_buf) {
> + dma_sync_single_for_cpu(dev, cmd_phys + alloc_len -
> resp_len,
> + resp_len, DMA_FROM_DEVICE);
> memcpy(resp_buf, qcom_scm_get_response_buffer(rsp),
> resp_len);
> + }
> out:
> - free_qcom_scm_command(cmd);
> + dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE);
> + kfree(cmd);
> return ret;
> }
>
> @@ -437,7 +380,8 @@ int __qcom_scm_set_cold_boot_addr(void *entry,
> const cpumask_t *cpus)
> * Set the Linux entry point for the SCM to transfer control to when
coming
> * out of a power down. CPU power down may be executed on cpuidle or
> hotplug.
> */
> -int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t
> *cpus)
> +int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
> + const cpumask_t *cpus)
> {
> int ret;
> int flags = 0;
> @@ -463,7 +407,7 @@ int __qcom_scm_set_warm_boot_addr(void *entry,
> const cpumask_t *cpus)
>
> cmd.addr = cpu_to_le32(virt_to_phys(entry));
> cmd.flags = cpu_to_le32(flags);
> - ret = qcom_scm_call(QCOM_SCM_SVC_BOOT,
> QCOM_SCM_BOOT_ADDR,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT,
> QCOM_SCM_BOOT_ADDR,
> &cmd, sizeof(cmd), NULL, 0);
> if (!ret) {
> for_each_cpu(cpu, cpus)
> @@ -487,25 +431,27 @@ void __qcom_scm_cpu_power_down(u32 flags)
> flags & QCOM_SCM_FLUSH_FLAG_MASK);
> }
>
> -int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
> +int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32
> +cmd_id)
> {
> int ret;
> __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
> __le32 ret_val = 0;
>
> - ret = qcom_scm_call(QCOM_SCM_SVC_INFO,
> QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
> - sizeof(svc_cmd), &ret_val, sizeof(ret_val));
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO,
> QCOM_IS_CALL_AVAIL_CMD,
> + &svc_cmd, sizeof(svc_cmd), &ret_val,
> + sizeof(ret_val));
> if (ret)
> return ret;
>
> return le32_to_cpu(ret_val);
> }
>
> -int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
> u32 *resp)
> +int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req
> *req,
> + u32 req_cnt, u32 *resp)
> {
> if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
> return -ERANGE;
>
> - return qcom_scm_call(QCOM_SCM_SVC_HDCP,
> QCOM_SCM_CMD_HDCP,
> + return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP,
> QCOM_SCM_CMD_HDCP,
> req, req_cnt * sizeof(*req), resp, sizeof(*resp)); } diff
--git
> a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index
> 63a2bfa..9166cbb 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -89,7 +89,7 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
> */
> int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) {
> - return __qcom_scm_set_warm_boot_addr(entry, cpus);
> + return __qcom_scm_set_warm_boot_addr(__scm->dev, entry,
> cpus);
> }
> EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
>
> @@ -119,7 +119,7 @@ bool qcom_scm_hdcp_available(void)
> if (ret)
> return ret;
>
> - ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
> + ret = __qcom_scm_is_call_available(__scm->dev,
> QCOM_SCM_SVC_HDCP,
> QCOM_SCM_CMD_HDCP);
>
> qcom_scm_clk_disable();
> @@ -143,7 +143,7 @@ int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req
> *req, u32 req_cnt, u32 *resp)
> if (ret)
> return ret;
>
> - ret = __qcom_scm_hdcp_req(req, req_cnt, resp);
> + ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
> qcom_scm_clk_disable();
> return ret;
> }
> diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
> index 7dcc733..afe6676 100644
> --- a/drivers/firmware/qcom_scm.h
> +++ b/drivers/firmware/qcom_scm.h
> @@ -19,7 +19,8 @@
> #define QCOM_SCM_FLAG_HLOS 0x01
> #define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
> #define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
> -extern int __qcom_scm_set_warm_boot_addr(void *entry, const
> cpumask_t *cpus);
> +extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void
> *entry,
> + const cpumask_t *cpus);
> extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t
> *cpus);
>
> #define QCOM_SCM_CMD_TERMINATE_PC 0x2
> @@ -29,12 +30,13 @@ extern void __qcom_scm_cpu_power_down(u32
> flags);
>
> #define QCOM_SCM_SVC_INFO 0x6
> #define QCOM_IS_CALL_AVAIL_CMD 0x1
> -extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
> +extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
> + u32 cmd_id);
>
> #define QCOM_SCM_SVC_HDCP 0x11
> #define QCOM_SCM_CMD_HDCP 0x01
> -extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32
> req_cnt,
> - u32 *resp);
> +extern int __qcom_scm_hdcp_req(struct device *dev,
> + struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
>
> /* common error codes */
> #define QCOM_SCM_ENOMEM -5
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
