[PATCH 2/7] regulator: bd96801: Use scoped device node handling to simplify error paths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Obtain the device node reference with scoped/cleanup.h and use scoped
for_each_child_of_node_scoped() to reduce error handling and make the
code a bit simpler.  Add also brackets {} over outer for loop for code
readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 drivers/regulator/bd96801-regulator.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/regulator/bd96801-regulator.c b/drivers/regulator/bd96801-regulator.c
index ec5b1a6b19e8..9876cc05867e 100644
--- a/drivers/regulator/bd96801-regulator.c
+++ b/drivers/regulator/bd96801-regulator.c
@@ -34,6 +34,7 @@
  * conflict in your downstream driver ;)
  */
 
+#include <linux/cleanup.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -453,15 +454,14 @@ static int bd96801_walk_regulator_dt(struct device *dev, struct regmap *regmap,
 				     int num)
 {
 	int i, ret;
-	struct device_node *np;
-	struct device_node *nproot = dev->parent->of_node;
 
-	nproot = of_get_child_by_name(nproot, "regulators");
+	struct device_node *nproot __free(device_node) =
+		of_get_child_by_name(dev->parent->of_node, "regulators");
 	if (!nproot) {
 		dev_err(dev, "failed to find regulators node\n");
 		return -ENODEV;
 	}
-	for_each_child_of_node(nproot, np)
+	for_each_child_of_node_scoped(nproot, np) {
 		for (i = 0; i < num; i++) {
 			if (!of_node_name_eq(np, data[i].desc.of_match))
 				continue;
@@ -476,11 +476,9 @@ static int bd96801_walk_regulator_dt(struct device *dev, struct regmap *regmap,
 				dev_err(dev,
 					"Initializing voltages for %s failed\n",
 					data[i].desc.name);
-				of_node_put(np);
-				of_node_put(nproot);
-
 				return ret;
 			}
+
 			if (of_property_read_bool(np, "rohm,keep-on-stby")) {
 				ret = regmap_set_bits(regmap,
 						      BD96801_ALWAYS_ON_REG,
@@ -489,14 +487,11 @@ static int bd96801_walk_regulator_dt(struct device *dev, struct regmap *regmap,
 					dev_err(dev,
 						"failed to set %s on-at-stby\n",
 						data[i].desc.name);
-					of_node_put(np);
-					of_node_put(nproot);
-
 					return ret;
 				}
 			}
 		}
-	of_node_put(nproot);
+	}
 
 	return 0;
 }

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux