Re: [PATCH 04/13] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bryan,

On 8/7/2024 10:04 PM, Bryan O'Donoghue wrote:
On 07/08/2024 14:08, Depeng Shao wrote:
Hi Vladimir,

On 8/5/2024 5:26 AM, Vladimir Zapolskiy wrote:
Hi Bryan,

On 8/1/24 11:16, Bryan O'Donoghue wrote:
On 01/08/2024 00:43, Vladimir Zapolskiy wrote:
+    ret = csiphy->res->hw_ops->init(csiphy);

Here.

What name would make more sense to you ?

according to the implementation the .init() call just fills some data in
memory, so I believe this could be handled at build time, if it's done
carefully enough...


This camss-csiphy-3ph-1-0.c is reused by many platforms, the old platforms have same CSI_COMMON_CTR register offset, their offset are 0x800, but some new platforms may have different CSI_COMMON_CTR register offset, for example, the CSI_COMMON_CTR register offset is 0x1000 in sm8550, then we need to add new file to support the new csiphy HW, e.g., camss-csiphy-3ph-2-0.c, so Bryan asked me to develop the CSIPHY driver based on his changes, then we just need few code to enable new CSIPHY.

Regarding the hw_ops->init interface, since it fills HW register configurations and HW register offset, then maybe, it also can be called as HW operation.

And looks like we can't move it to camss-csiphy.c since it does platform specific operation and it is related to the registers.

Please feel free to share other comments if you don't agree with it. Thanks.


Thanks,
Depeng

So, I agree the phy init data could be obtained via resource structs but, rather than add yet more patches to this series, I'd say we can make the move to a separate resource struct pointer at a later date.

Lets drop this patch and @Depeng we can then do


+    regs->offset = 0x800;

media: qcom: camss: csiphy-3ph: Use an offset variable to find common control regs



Do you mean only drop "[PATCH 04/13] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices"?


[PATCH 05/13] media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct Do you mean this is still needed? Just don't move the code from csiphy_gen2_config_lanes to csiphy_init, right?


[PATCH 06/13] media: qcom: camss: csiphy-3ph: Use an offset variable to find common control regs The offset change is also needed, just need to add the offset for different platform in csiphy_gen2_config_lanes .

Please correct me if my understanding is wrong. Thanks.

As a bonus that's one less patch for this series which @ 13 patches is already large.

---
bod

Thanks,
Depeng





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux