Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/4/2024 2:26 PM, Krzysztof Kozlowski wrote:
On 03/08/2024 05:22, Krishna chaitanya chundru wrote:
Add binding describing the Qualcomm PCIe switch, QPS615,
which provides Ethernet MAC integrated to the 3rd downstream port
and two downstream PCIe ports.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
  .../devicetree/bindings/pci/qcom,qps615.yaml       | 191 +++++++++++++++++++++
  1 file changed, 191 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/qcom,qps615.yaml b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml
new file mode 100644
index 000000000000..ea0c953ee56f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,qps615.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPS615 PCIe switch
+
+maintainers:
+  - Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
+
+description: |
+  Qualcomm QPS615 PCIe switch has one upstream and three downstream
+  ports. The 3rd downstream port has integrated endpoint device of
+  Ethernet MAC. Other two downstream ports are supposed to connect
+  to external device.
+
+  The QPS615 PCIe switch can be configured through I2C interface before
+  PCIe link is established to change FTS, ASPM related entry delays,
+  tx amplitude etc for better power efficiency and functionality.
+
+properties:
+  compatible:
+    enum:
+      - pci1179,0623
+
+  reg:
+    maxItems: 1
+
+  qcom,qps615-controller:

and now I see that you totally ignored comments. Repeating the same over
and over is a waste of time.

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>


Best regards,
Krzysztof

Hi Krzysztof,

In patch1 we are trying to add reference of i2c-adapter, you suggested
to use i2c-bus for that. we got comments on the driver code not to use
adapter and instead use i2c client reference. I felt i2c-bus is not
ideal to represent i2c client device so used this name.

I should have mentioned all these details in the change log for all
these changes. Next time onwards I will give detailed change log for
the changes between two versions.

- Krishna Chaitanya.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux