The DSI node now has two ports that describe the connection between the
MDP interface output and the DSI input, and the connection between the DSI
output and the connected panel/bridge. Update the properties and the
example.
Also, use generic PHY bindings instead of the custom one.
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/msm/dsi.txt | 53 +++++++++++++++-------
1 file changed, 37 insertions(+), 16 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index bf41d7c..0223f06 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -25,12 +25,18 @@ Required properties:
- vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node
-- qcom,dsi-phy: phandle to DSI PHY device node
+- phys: phandle to DSI PHY device node
+- phy-names: the name of the corresponding PHY device
- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
+- ports: Contains 2 DSI controller ports as child nodes. Each port contains
+ an endpoint subnode as defined in [2] and [3]. port@0 describes the
+ connection between the MDP interface output and the DSI input. port@1
+ describes the connection between the DSI output and the connected
+ panel/bridge.
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
- See files in [2] for each supported panel.
+ See files in [4] for each supported panel.
- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
@@ -42,15 +48,15 @@ Optional properties:
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state
-- port: DSI controller output port, containing one endpoint subnode.
DSI Endpoint properties:
- - remote-endpoint: set to phandle of the connected panel's endpoint.
- See [3] for device graph info.
+ - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
+ input endpoint. For port@1, set to the MDP interface output.
- qcom,data-lane-map: this describes how the logical DSI lanes are mapped
to the physical lanes on the given platform. The value contained in
index n describes what logical data lane is mapped to the physical data
- lane n (DATAn, where n lies between 0 and 3).
+ lane n (DATAn, where n lies between 0 and 3). Only for the endpoint in
+ port@1.
For example:
@@ -97,8 +103,9 @@ Optional properties:
regulator is wanted.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/display/panel/
-[3] Documentation/devicetree/bindings/graph.txt
+[2] Documentation/devicetree/bindings/graph.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/display/panel/
Example:
dsi0: dsi@fd922800 {
@@ -129,7 +136,8 @@ Example:
vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>;
- qcom,dsi-phy = <&dsi_phy0>;
+ phys = <&dsi_phy0>;
+ phy-names ="dsi_phy";
qcom,dual-dsi-mode;
qcom,master-dsi;
@@ -139,6 +147,26 @@ Example:
pinctrl-0 = <&mdss_dsi_active>;
pinctrl-1 = <&mdss_dsi_suspend>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ qcom,data-lane-map = <0 1 2 3>;
+ };
+ };
+ };
+
panel: panel@0 {
compatible = "sharp,lq101r1sx01";
reg = <0>;
@@ -153,13 +181,6 @@ Example:
};
};
};
-
- port {
- dsi0_out: endpoint {
- remote-endpoint = <&panel_in>;
- qcom,data-lane-map = <0 1 2 3>;
- };
- };
};
dsi_phy0: dsi_phy@fd922a00 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
