Re: [PATCH v2 1/8] dt-bindings: PCI: Add binding for qps615

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Aug 03, 2024 at 08:52:47AM GMT, Krishna chaitanya chundru wrote:
> Add binding describing the Qualcomm PCIe switch, QPS615,
> which provides Ethernet MAC integrated to the 3rd downstream port
> and two downstream PCIe ports.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/qcom,qps615.yaml       | 191 +++++++++++++++++++++
>  1 file changed, 191 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,qps615.yaml b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml
> new file mode 100644
> index 000000000000..ea0c953ee56f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml
> @@ -0,0 +1,191 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/qcom,qps615.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QPS615 PCIe switch
> +
> +maintainers:
> +  - Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> +
> +description: |
> +  Qualcomm QPS615 PCIe switch has one upstream and three downstream
> +  ports. The 3rd downstream port has integrated endpoint device of
> +  Ethernet MAC. Other two downstream ports are supposed to connect
> +  to external device.
> +
> +  The QPS615 PCIe switch can be configured through I2C interface before
> +  PCIe link is established to change FTS, ASPM related entry delays,
> +  tx amplitude etc for better power efficiency and functionality.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - pci1179,0623
> +
> +  reg:
> +    maxItems: 1
> +
> +  qcom,qps615-controller:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Reference to the I2C client used to do configure qps615
> +
> +  vdd18-supply: true
> +
> +  vdd09-supply: true
> +
> +  vddc-supply: true
> +
> +  vddio1-supply: true
> +
> +  vddio2-supply: true
> +
> +  vddio18-supply: true
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO controlling the RESX# pin.
> +
> +  qps615,axi-clk-freq-hz:
> +    description:
> +      AXI clock which internal bus of the switch.

Is it a clock or clock rate?

> +
> +  qcom,l0s-entry-delay-ns:
> +    description: Aspm l0s entry delay in nanoseconds.

I'd say, from the property name it is obvious that it comes in
nanoseconds.

> +
> +  qcom,l1-entry-delay-ns:
> +    description: Aspm l1 entry delay in nanoseconds.
> +
> +  qcom,tx-amplitude-millivolt:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Change Tx Margin setting for low power consumption.
> +
> +  qcom,no-dfe:
> +    type: boolean
> +    description: Disables DFE (Decision Feedback Equalizer).
> +
> +  qcom,nfts:
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    description:
> +      Fast Training Sequence (FTS) is the mechanism that
> +      is used for bit and Symbol lock.

Doesn't help to understand what it is and what the value means.

> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus-common.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: pci1179,0623
> +      required:
> +        - compatible
> +    then:
> +      required:
> +        - vdd18-supply
> +        - vdd09-supply
> +        - vddc-supply
> +        - vddio1-supply
> +        - vddio2-supply
> +        - vddio18-supply
> +        - qcom,qps615-controller
> +        - reset-gpios
> +
> +patternProperties:
> +  "@1?[0-9a-f](,[0-7])?$":
> +    type: object
> +    $ref: qcom,qps615.yaml#
> +    additionalProperties: true
> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    pcie {
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +
> +        pcie@0 {
> +            device_type = "pci";
> +            reg = <0x0 0x0 0x0 0x0 0x0>;
> +
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            ranges;
> +
> +            pcie@0,0 {
> +                compatible = "pci1179,0623";
> +                reg = <0x10000 0x0 0x0 0x0 0x0>;
> +                device_type = "pci";
> +                #address-cells = <3>;
> +                #size-cells = <2>;
> +                ranges;
> +
> +                qcom,qps615-controller = <&qps615_controller>;

Where is the corresponding device?

> +
> +                vdd18-supply = <&vdd>;
> +                vdd09-supply = <&vdd>;
> +                vddc-supply = <&vdd>;
> +                vddio1-supply = <&vdd>;
> +                vddio2-supply = <&vdd>;
> +                vddio18-supply = <&vdd>;
> +
> +                reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
> +
> +                pcie@1,0 {
> +                    reg = <0x20800 0x0 0x0 0x0 0x0>;
> +                    #address-cells = <3>;
> +                    #size-cells = <2>;
> +                    device_type = "pci";
> +                    ranges;
> +
> +                    qcom,no-dfe;
> +                };
> +
> +                pcie@2,0 {
> +                    reg = <0x21000 0x0 0x0 0x0 0x0>;
> +                    #address-cells = <3>;
> +                    #size-cells = <2>;
> +                    device_type = "pci";
> +                    ranges;
> +
> +                    qcom,nfts = /bits/ 8 <10>;
> +                };
> +
> +                pcie@3,0 {
> +                    reg = <0x21800 0x0 0x0 0x0 0x0>;
> +                    #address-cells = <3>;
> +                    #size-cells = <2>;
> +                    device_type = "pci";
> +                    ranges;
> +
> +                    qcom,tx-amplitude-millivolt = <10>;
> +
> +                         pcie@0,0 {

Wrong indentation.

> +                              reg = <0x40000 0x0 0x0 0x0 0x0>;
> +                              #address-cells = <3>;
> +                              #size-cells = <2>;
> +                              device_type = "pci";
> +                              ranges;
> +
> +                              qcom,l1-entry-delay-ns = <10>;
> +                         };
> +
> +                         pcie@0,1 {
> +                              reg = <0x40100 0x0 0x0 0x0 0x0>;
> +                              #address-cells = <3>;
> +                              #size-cells = <2>;
> +                              device_type = "pci";
> +                              ranges;
> +
> +                              qcom,l0s-entry-delay-ns = <10>;
> +                         };
> +                };
> +            };
> +        };
> +    };
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux