Re: [PATCH] phy: qcom: com-qmp-combo: fix swing and pre-emphasis table for sm8350

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25-07-24, 15:06, Abhinav Kumar wrote:
> Fix the voltage swing and pre-emphasis tables for sm8350 as the current
> one do not match the hardware docs.
> 
> Fixes: ef14aff107bd ("phy: qcom: com-qmp-combo: add SM8350 & SM8450 support")
> Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 31e43638a649..c15b01aa5a48 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -1946,8 +1946,8 @@ static const struct qmp_phy_cfg sm8350_usb3dpphy_cfg = {
>  
>  	.swing_hbr_rbr		= &qmp_dp_v4_voltage_swing_hbr_rbr,
>  	.pre_emphasis_hbr_rbr	= &qmp_dp_v4_pre_emphasis_hbr_rbr,
> -	.swing_hbr3_hbr2	= &qmp_dp_v3_voltage_swing_hbr3_hbr2,
> -	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v4_pre_emphasis_hbr3_hbr2,
> +	.swing_hbr3_hbr2	= &qmp_dp_v5_voltage_swing_hbr3_hbr2,
> +	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,

This is fine but you need to drop the unused qmp_dp_v4_pre_emphasis_hbr3_hbr2 table...

It adds a warning, defined but unused!

-- 
~Vinod




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux