[PATCH v2] arm64: dts: qcom: sc8280xp-x13s: Enable RGB sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable the main RGB sensor on the Lenovo x13s a five megapixel 2 lane DPHY
MIPI sensor connected to cisphy0.

With the pm8008 patches recently applied to the x13s dtsi we can now also
enable the RGB sensor. Once done we have all upstream support necessary for
the RGB sensor on x13s.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
The Lenovo x13s has a five megapixel ov5675 sensor as well as a one
megpixel ov9734 B+W NOIR sensor for low-light face detection login.

This patch enables the RGB sensor.

A gpio exists in the upstream dts to indicate camera activity which
currently we don't tie to CAMSS activity yet.

Running

- A Linux distro which ships libcamera > 0.3.0
- Firefox nightly
- Setting Firefox about:config:media.webrtc.capture.allow-pipewire = true

It should then be possible to use the on-board MIPI camera for Zoom,
Hangouts etc.

Changes in v2:
- Drops useless assigned-clocks entry 
- Link to v1: https://lore.kernel.org/r/20240801-b4-linux-next-24-07-31-camss-sc8280xp-lenovo-rgb-v2-v1-1-30622c6a0c48@xxxxxxxxxx
---
 .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts     | 72 ++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index a7c5a3f5926c7..2bdfff2a16cad 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -592,6 +592,62 @@ vreg_l10d: ldo10 {
 	};
 };
 
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+
+	ports {
+		/* The port index denotes CSIPHY id i.e. csiphy0 */
+		port@0 {
+			csiphy0_lanes01_ep: endpoint@0 {
+				reg = <0>;
+				clock-lanes = <7>;
+				data-lanes = <0 1>;
+				remote-endpoint = <&ov5675_ep>;
+			};
+		};
+	};
+};
+
+&cci2 {
+	status = "okay";
+};
+
+&cci2_i2c1 {
+	camera@10 {
+		compatible = "ovti,ov5675";
+		reg = <0x10>;
+
+		reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAMCC_MCLK3_CLK>;
+
+		orientation = <0>;	/* Front facing */
+
+		avdd-supply = <&vreg_l6q>;
+		dvdd-supply = <&vreg_l2q>;
+		dovdd-supply = <&vreg_l7q>;
+
+		port {
+			ov5675_ep: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <450000000>;
+				remote-endpoint = <&csiphy0_lanes01_ep>;
+			};
+		};
+
+	};
+};
+
 &dispcc0 {
 	status = "okay";
 };
@@ -1436,6 +1492,22 @@ cam_indicator_en: cam-indicator-en-state {
 		bias-disable;
 	};
 
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio17";
+			function = "cam_mclk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sc-rgb-xshut-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio25";
 		function = "gpio";

---
base-commit: cd19ac2f903276b820f5d0d89de0c896c27036ed
change-id: 20240731-b4-linux-next-24-07-31-camss-sc8280xp-lenovo-rgb-v2-525b250dfb84

Best regards,
-- 
Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux