Re: [PATCH v3 1/2] PCI: dwc: Add dbi_phys_addr and atu_phys_addr to struct dw_pcie

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 01, 2024 at 02:29:49PM -0700, Prudhvi Yarlagadda wrote:
> Hi Serge,
> 
> Thanks for the review comment.
> 
> On 8/1/2024 12:25 PM, Serge Semin wrote:
> > On Tue, Jul 23, 2024 at 07:27:18PM -0700, Prudhvi Yarlagadda wrote:
> >> Both DBI and ATU physical base addresses are needed by pcie_qcom.c
> >> driver to program the location of DBI and ATU blocks in Qualcomm
> >> PCIe Controller specific PARF hardware block.
> >>
> >> Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@xxxxxxxxxxx>
> >> Reviewed-by: Mayank Rana <quic_mrana@xxxxxxxxxxx>
> >> ---
> >>  drivers/pci/controller/dwc/pcie-designware.c | 2 ++
> >>  drivers/pci/controller/dwc/pcie-designware.h | 2 ++
> >>  2 files changed, 4 insertions(+)
> >>
> >> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> >> index 1b5aba1f0c92..bc3a5d6b0177 100644
> >> --- a/drivers/pci/controller/dwc/pcie-designware.c
> >> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> >> @@ -112,6 +112,7 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
> >>  		pci->dbi_base = devm_pci_remap_cfg_resource(pci->dev, res);
> >>  		if (IS_ERR(pci->dbi_base))
> >>  			return PTR_ERR(pci->dbi_base);
> >> +		pci->dbi_phys_addr = res->start;
> >>  	}
> >>  
> >>  	/* DBI2 is mainly useful for the endpoint controller */
> >> @@ -134,6 +135,7 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
> >>  			pci->atu_base = devm_ioremap_resource(pci->dev, res);
> >>  			if (IS_ERR(pci->atu_base))
> >>  				return PTR_ERR(pci->atu_base);
> >> +			pci->atu_phys_addr = res->start;
> >>  		} else {
> >>  			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
> >>  		}
> >> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> >> index 53c4c8f399c8..efc72989330c 100644
> >> --- a/drivers/pci/controller/dwc/pcie-designware.h
> >> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> >> @@ -407,8 +407,10 @@ struct dw_pcie_ops {
> >>  struct dw_pcie {
> >>  	struct device		*dev;
> >>  	void __iomem		*dbi_base;
> > 
> >> +	phys_addr_t		dbi_phys_addr;
> >>  	void __iomem		*dbi_base2;
> >>  	void __iomem		*atu_base;
> >> +	phys_addr_t		atu_phys_addr;
> > 
> > What's the point in adding these fields to the generic DW PCIe private
> > data if they are going to be used in the Qcom glue driver only?
> > 
> > What about moving them to the qcom_pcie structure and initializing the
> > fields in some place of the pcie-qcom.c driver?
> > 
> > -Serge(y)
> > 
> 

> These fields were in pcie-qcom.c driver in the v1 patch[1] and
> Manivannan suggested to move these fields to 'struct dw_pcie' so that duplication
> of resource fetching code 'platform_get_resource_byname()' can be avoided.
> 
> [1] https://lore.kernel.org/linux-pci/a01404d2-2f4d-4fb8-af9d-3db66d39acf7@xxxxxxxxxxx/T/#mf9843386d57e9003de983e24e17de4d54314ff73

Em, polluting the core driver structure with data not being used by
the core driver but by the glue-code doesn't seem like a better
alternative to additional platform_get_resource_byname() call in the
glue-driver. I would have got back v1 version so to keep the core
driver simpler. Bjorn?

-Serge(y)

> 
> Thanks,
> Prudhvi
> >>  	size_t			atu_size;
> >>  	u32			num_ib_windows;
> >>  	u32			num_ob_windows;
> >> -- 
> >> 2.25.1
> >>
> >>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux